CyberData 010935B Operation Manual page 5

Revision History
Revision
A
B
C
D
E
F
CyberData Corporation
Date Released Description of Changes
10/3/2008 This is the first release of the 010935B manual.
11/17/2008 Updated Figure
12/8/2008 Updates Section 2.1.3, "Set up the
Updates Figure 2-17
Updates Table 2-6
Adds Table
Updates Section 2.1.3, "Set up the
Adds Section 2.1.5, "Configure the Sensor Setup
Adds Note about upgrading the firmware to version 3.3.0 in
"Upgrade the Firmware and Reboot the
Firmware: This revision provides information for firmware version 3.3.0.
Release notes detailing the difference between this firmware version and
earlier firmware versions is available in the firmware zip file at the following
URL:
http://www.cyberdata.net/support/voip/intercom.html
1/6/2009 Updates Section 2.1.6.1, "Announcing the IP
Updates Section 2.1.6.2, "Restore the Factory Default
Changes firmware version number to 3.3.2.
3/11/2009 Adds Section 2.1.4.1, "Point-to-Point Configuration"
"Receiving point-to-point SiP calls may not work with all phones."
Adds Figure 2-21, "SIP Setup Page Set to Point-to-Point
Updates Section 2.1.5, "Configure the Sensor Setup Parameters"
information about sensor setup options.
5/27/2009 Adds Section 1.7,
930242F
2-8.
Intercom".
through Figure 2-24.
and Table 2-7.
2-8.
Intercom".
"Dimensions".
Parameters".
Section 2.1,
Intercom".
Address".
Settings".
and the following note:
Mode"
Operations Guide
to add