CyberData 010935B Operation Manual page 28

Web Page Item
3. After changing the parameters, click Save Settings. This updates the changed parameters and
4. Connect the Intercom to the target network.
5. From a system on the same network as the Intercom, open a browser with the new IP address of
Operations Guide
Table 2-5. Network Setup Parameters (continued)
reboots the Intercom if appropriate.
the Intercom.
Description
Link to the SIP Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
930242F
Installing the VoIP Intercom
Configure the Intercom Parameters
CyberData Corporation
22