Info Banner; Selection Of Audio Language - Strong SRT 7004 User Manual

PART 1 • English
6.1.1 direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 buttons on the
remote control. Channel numbers can be up to four digits long. Entering a number with less than four
digits is possible. Just wait a few seconds (or press ok) and your receiver will switch to the selected
channel.
6.1.2 Channel list
Press ok in viewing mode to display the channel list. Press pq to highlight your channel of choice
and press ok once to select the highlighted channel. The channel list is equipped with a Search
function to make it easier to find channels. In the channel list, press gREEn and an alphabet popup
will be displayed. Press pq to select the first letter (or letters) of your channel of choice. Press EXIT to
leave the popup. All channels beginning with the chosen letter(s) will now be displayed. Now select
the channel in the filtered list.
The following buttons are available in the channel list and in viewing mode:
gREEn:
Tv/RAdIo:
bluE:
In viewing mode:
fAvouRITE:
6.1.3 using the
pq
p will switch to a higher channel.
q will switch a lower channel.
6.1.4 using the RECAll button
Press the RECAll button for switching between the last viewed channels.

6.2 Info banner

At any time during viewing mode you can press the button to get information about the
current channel as well as the current and following programme*. Press twice to view detailed
info of current and following programmes. Press tu to see information about current and next
programme. Press three times to view technical details about the current channel. Press again or
EXIT to close the information.
You can change the on-screen duration of the info banner in the System menu. Please refer to section
7.2.5 for more details.
*Programme information is displayed when available. Availability depends on broadcast.

6.3 selection of audio language

Some channels support a choice of different audio formats and/or languages. To select another audio
stream, press AudIo in viewing mode. A list with available audio streams will now be displayed. Press
pq to select a stream and confirm with ok. With the tu buttons you can choose between mono
left, mono right or stereo audio.
Opens an alphabet banner to quickly find a channel
Toggles between TV and radio channels
While in channel list, jump to top line, to scroll through satellites list.
To switch to one of the available favourite lists.
buttons
9