Strong SRT 7004 User Manual page 15

IF Channel:
Center Frequency:
Select the store button to finalize your settings or press mEnu or EXIT to leave without storing.
7.1.3 satellite and Transponder edit options
When in Satellite Setting use the REd TP Edit button to edit Satellites and Transponders.
Use tu to switch between Left and Right window. (Satellite List and Transponder List.)
Add:
Delete
Edit:
Polarity:
After entering all data, press ok and confirm with ok or press EXIT to leave without saving.
Use gREEn to enter to the Automatic scan window.
12
Select the IF channel number according to the specifications of your SatCR
LNB. note: Any SatCR LNB in the chain needs a different IF channel number.
Select the Center Frequency according to the specifications of your SatCR
LNB. note: Any SatCR LNB in the chain needs a different Center Frequency.
While in the satellite name list: Press YElloW to add a new satellite. In the
popup window, enter a satellite name with the key table (press u), selecting
a character by using the navigation buttons. Press ok to enter the chosen
character. When you have entered the name, navigate to the  on screen and
press ok on the remote control to confirm the new name. Select the satellites
position E for East and W for West. Longitude: Use the numeric keys to enter
the longitude of the satellite. Save the settings with ok or cancel with EXIT.
While in the Transponder list: Press YElloW to add a new Transponder. In
the popup window enter the frequency, symbol rate and polarity of the new
transponder.
While in the satellite name list: Press bluE to delete a satellite from the list.
Press gREEn to delete the selected satellite, select YElloW to delete all
satellites. Confirm deleting with ok or EXIT to cancel.
While in the Transponder list: Press bluE to delete a transponder from the list.
Press gREEn to delete the selected transponder, select YElloW to delete all
transponders. Confirm deleting with ok or EXIT to cancel.
While in the satellite name list: Press REd Edit to enter the Sat Edit window.
Select the satellites position E for East and W for West. Longitude: Use the
numeric keys to enter the longitude of the satellite. Enter a satellite name
with the key table (press u), selecting a character by using the navigation
buttons. Press ok to enter the chosen character. When you have entered the
name, navigate to the  on screen and press ok on the remote control to
confirm the new name. Save the settings with ok or cancel by EXIT.
While in the Transponder list: Press REd Edit to enter the TP Edit window.
Frequency: Use the numeric keys to enter a known frequency of the satellite
transponder. Symbol Rate: Use the 0 ~ 9 buttons to enter the symbol rate of
the satellite transponder.
Press tu to select the polarization of the satellite transponder. V (Vertical) or
H (Horizontal).
PART 1 • English