Troubleshooting - Strong SRT 7004 User Manual

Digital high definition satellite receiver
Hide thumbs Also See for SRT 7004:
Table of Contents

Advertisement

PART 1 • English
Random:
Repeat:
Interval Time:
Effect:
Options available with the gREEn button: Folder view or Thumbnail view, During slide show: Select
music to accompany your slide show.
Options available with the YElloW button: Big or Small thumbnails.

8.0 TRoublEshooTIng

There may be various reasons for abnormal operation of the receiver. Please check the receiver
according to the procedures shown below. If the receiver does not work properly after checking
it, please contact your local Service line or a STRONG dealer. Alternatively you can send a support
mail via our website: www . strong . tv. NEVER open or disassemble your receiver. This may cause a
dangerous situation and will void the warranty.
Problem
The display on the front panel
does not light up.
No sound or picture,
but the front panel shows
red light
No sound or picture, but the
receiver menu can be seen on
TV screen.
(press 'menu' on remote)
No signal or weak signal,
intermittent reception.
On: Pictures will be shown in a random order.
All: Repeat at the end of the list.
You can adjust the slide show interval from Slow to Fast.
On: Implement a random slide show effect.
Possible cause
Mains cable is not connected
Mains fuse blown
The receiver is in standby
mode
Channel is off-air
The satellite dish is not
pointing at the (correct)
satellite.
Channels deleted in edit menu
Cables might have loosened.
Moisture might have entered
into cables or connectors.
Heavy rain at present.
Heavy storm at present.
The satellite dish is not
pointing at the (correct)
satellite(s)
Satellite dish is too small
Trees or buildings in path.
Signal is too strong, dish is
oversized.
What to do
Check that the mains cable is
plugged into the power socket
Check mains fuse
Press the On/Standby button
Try other channel(s).
Check the signal level in the
Antenna Setup menu. Adjust
the dish.
Scan for channels (again)
Check the cable connections,
LNB and other equipment
connected between the LNB
and the receiver, or peak
the dish.
Wait for rain/storm to subside
Adjust the dish. Ask a local
satellite specialist for advice.
Change to a larger dish
Change position of dish
Connect a signal attenuator
to the LNB input. Ask a local
satellite specialist for advice.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents