Download  Print this page

Operation; Starting The Engine - Husqvarna 968999239 Operator's Manual

Stump grinder
Hide thumbs

Advertisement

Starting the engine

Check that all daily maintenance as described in
the maintenance schedule has been performed.
Check that there is sufficient fuel in the tank.
Fuel valve
Open the fuel valve. Place the lever all the way to
the right.
Choke control
When starting the engine warm, the lever should
be in the right position; see the illustration.
When starting the engine cold or partially warm,
place the lever completely or partly to the left.
Move the lever back to the right once the engine
starts. When the engine is cold, it may be best to
move the lever back in several stages. Find the
position where the engine runs smoothly.
Throttle
Set the throttle on the handle to the SLOW(START)/
DISENGAGE position.
Engine switch on the engine
Swtich on engine is disconnected, use engine
switch on handlebar.
24

OPERATION

FUEL VALVE
8011-182
CHOKE
CONTROL
8011-183
8011-071

Advertisement

Table of Contents
loading

  Related Manuals for Husqvarna 968999239

This manual is also suitable for:

Sg13a / ceSg13a