1.5 Environmental Requirements
1.5.1 Temperature and Humidity
Housing temperature during operation:
Humidity during operation:
Storage Temperature:
Storage Humidity
1.5.2 Ventilation
Allow sufficient air circulation around the camera to prevent internal heat build-up in your system
and to keep the camera housing temperature during operation below the maximum shown above.
Provide additional cooling such as fans or heat sinks if necessary.
Basler A400k
You can read out the camera's inner temperature via the temperature register (page
4-8). The maximum recommended inner temperature is 65° C (149° F).
Note that the camera components' life time and the image quality are higher the
lower the temperature of the camera.
DRAFT
0° C ... + 50° C (+ 32° F ... + 122° F)
20% ... 80%, relative, non-condensing
-20° C ... +80° C (-4° F ... +176° F)
5% ... 95% relative, non-condensing
Introduction
1-7