Feature Control And Status Register Details - Basler A400K User Manual

4.2.2.2 Feature Control and Status Register Details

Video Data Output Mode CSR
Register Base Address: 0x1700
Field Name: Register Status
Description: The integer value in this field indicates the status of this control register:
Field Name: Mode
Description: Writing an integer value to this field sets the video data output mode:
Exposure Time Control Mode CSR
Register Base Address: 0x1400
Field Name: Status
Description: The integer value in this field indicates the status of this control register:
Field Name: Mode
Description: Writing an integer value to this field sets the exposure time control mode:
Basler A400k
DRAFT
0x00 = The register is not available
0x01 = The register is available. All related settings are OK
0x80 = A value in this register is set out of range
0x01 = 2 tap 8 bit output (A402k)
0x03 = 2 tap 10 bit output (A402k)
0x10 = 4 tap 8 bit output (A403k and A404k)
0x12 = 4 tap 10 bit output (A403k and A404k)
0x11 = 8 tap 8 bit output (A404k)
See Sections 2.5.5 (A402k),
data output modes.
0x00 = The register is not available
0x01 = The register is available. All related settings are OK
0x80 = A value in this register is set out of range
0x00 = Free-run programmable
0x02 = Free-run edge-controlled
0x04 = ExSync level-controlled
0x05 = ExSync programmable
0x06 = ExSync edge-controlled
See Section 3.3 for descriptions of the exposure time control modes.
Offset: 0x0000
Offset: 0x0001
2.5.6 (A403k) and 2.5.7 (A404k) for descriptions of the video
Offset: 0x0000
Offset: 0x0001
Configuring the Camera
Size: 1 Byte Type: Read only
Size: 1 Byte Type: Read / Write
Size: 1 Byte Type: Read only
Size: 1 Byte Type: Read / Write
4-15