Cable Information; Camera Link Cable; Power Cable - Basler A400K User Manual

2.2 Cable Information

2.2.1 Camera Link Cable

A Camera Link compatible MDR cable assembly is available from Basler as a stock item (part #
1000013905 for a 3 meter cable and part # 1000013906 for a 5 meter cable). Alternatively, you
can use the cable assembly manufactured by 3M (part # 14X26-SZLB-XXX-0LC).
The maximum allowed length for the MDR cable used with an A400k is 7 meters.
The maximum cable length will decrease when used in an area with severe ambient
electromagnetic interference.

2.2.2 Power Cable

A Hirose, 6-pin locking plug will be shipped with each camera. This plug should be used to connect
the power supply cable to the camera.
For proper EMI protection, the power supply cable attached to this plug must be a twin-cored,
shielded cable. Also, the housing of the Hirose plug must be connected to the cable shield and
the cable must be connected to earth ground at the power supply.
Power requirements are given in Section 2.8.
Basler A400k
DRAFT
Camera Interface
2-7