Uploading An Aoi List To The Camera - Basler A400K User Manual

With the AOI Editor
The AOI Editor is a convenient graphical interface for defining AOIs with the relevant parameters
and for solving conflicting parameter settings. The AOI Editor can also be used for uploading an
AOI list to the camera or for downloading an AOI list from the camera for editing. AOIs can be
defined by
• decimal entries in an AOI list and
• in a graphical way by drag & drop. This can be done with reference to a full image taken by
the camera.
You can downlad the AOI Editor and the pertinent User's Manual free of charge from www.basler-
vc.com.

3.8.4.3 Uploading an AOI List to the Camera

Once you have an AOI list hex file in place, you can upload the hex file to the camera. With the
hex file uploaded to the camera, the camera will use the settings in the file as soon as the AOI
sequencer feature is enabled.
Uploading the hex file will also save the file in the camera's non-volatile memory. If an AOI list file
already exists, it will be overwritten.
Uploading a HEX File to the Camera
You can upload the hex file to the camera by using the Camera Configuration Tool Plus CCT+ or
by using binary read/write commands from within your own application to set the camera's bulk
data control and status registers (CSRs).
With the CCT+
With the CCT+ (see Section 4.1), you use the Upload AOI List File setting in the AOI List File
parameters group to upload the hex file to the camera.
By Setting CSRs
You can upload the hex file to the camera by writing values to the bulk data CSR for the
Programmable AOI Sequencer feature.
Section 4.2.3
explains using read/write commands.
With the AOI Editor
You can upload an AOI list using the AOI Editor (see Section 3.8.4.2)
Basler A400k
DRAFT
explains bulk data CSRs and using the bulk data activate process. Section
Basic Operation and Features
4.3.1
3-31