Setup - Strong Srt Ant 10 Eco User Manual

PART 1 • English
4. When By Channel is selected use the cursor buttons to select Scan Band and Channel
No.. When By Frequency is selected use the cursor buttons to select Frequency and
Bandwidth. Set Network Search to ON or OFF, highlight Search and press oK to
start scanning. Found channels will be stored and the receiver will switch to the first
channel in the list.
5.2.3 Antenna Setting
1. Press mEnU to enter main menu.
2. Use the qp buttons to select Installation and press oK to enter the menu.
3. Select Antenna setting with qp and press oK to enter.
4. Use the tu buttons to change the setting. If On is selected, the receiver will provide
5V antenna power (for active antennas).
5. Press EXIT button to exit.
5.2.4 lCn mode
If LCN (Logical Channel Numbering) is activated and LCN signal is provided by the operator,
channels will be stored in operator defined order. You can activate/deactivate the LCN function by
setting the LCN Mode to ON or OFF.

5.3 Setup

This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer
Setting, OSD Setting and Parental Lock.
1. Use pq to highlight the desired menu and press oK to proceed. Select the desired
item with pq. Settings can be changed with the tu buttons. To get a better
overview of possible settings, press oK first. Now you can select settings with pq
and confirm with oK.
2. Press EXIT button to exit.
5.3.1 oSD language
This menu allows you to set the OSD Language.
5.3.2 Subtitles preference
This menu allows you to set the preferred Subtitles Language and to switch Subtitles Type between
Normal and Hard of Hearing.
5.3.3 Tv System
This menu allows to setup different settings concerning your TV set.
Display Mode:
Aspect Ratio:
Video Output:
5.3.4 Region and Time
Here you can set your region and time zone.
PAL/NTSC/AUTO
Use this menu to configure the screen aspect. Possible settings are: 4:3PS
(Pan&Scan), 4:3LB (Letter Box), 16:9 (Wide Screen) and AUTO.
Use this menu to switch the video output mode between RGB and CVBS.
9