First Installation; Setup Dtv First Installation - Strong SRT 2221 User Manual

Download and install the latest new video app from the Store first. Then switch the main power Off
and insert the USB webcam connector into one of the free USB slots. Switch the main power back On.
The webcam will be automatically recognised and you can start using it.
*Not included in the packaging.
Note
If you like to change the login name, camera model or if you don't get the webcam running, enter
"Settings – Apps – Skype -- Clear data" first and then login to Skype to test a video call and if the new
login works.

4.0 FIRST INSTALLATION

This procedure will enable you to enjoy and setup your Android receiver just with a few steps. It
is recommended to follow the First Installation step by step. It will guide you through the basic
installation and channel searching process.
Step 1: Language
Step 2: Resolution
Step 3: Screen Size
Step 4: Network
Step 5: Date&Time:

4.1 Setup DTV First Installation

Step 1:
This menu allows you to select your Country, Picture size, Zap modes and the preferred Subtitles.
Please check on our web site www.strong.tv for the supported webcam
models.
Select your preferred language for the on screen menu. Use tu to change
language and press OK to confirm your selection.
Select the screen resolution you prefer. Default selection is Automatic, which
already shows the best setting of the connected screen. Press OK to confirm
your selection and the receiver will follow. A banner appears to confirm the
new setting by selecting OK.Confirm again with OK. If you do not see this
banner immediately, wait a couple of seconds and the screen will return to its
previous state. Then try another resolution.
Use p/q to adjust size of the screen so it exactly fits the screen you are
using. Press OK to confirm.
If you have already connected the LAN internet cable to your router, in most
cases the unit finds the correct settings automatically and jumps directly
to Step 5. If you haven't connected a LAN internet cable, but prefer using
Wi-Fi, select Wi-Fi and press OK to open the menu with the available wireless
networks. Use p/q to select your network and enter the key or password.
The 0 ~ 9 buttons on the remote control can also be used for entering.
If you have successfully connected to the Internet in Step 4, this screen will
automatically show the date and your local time. If needed you can select an
item to modify it manually. At the bottom you will find the selection Setup
Digital TV and Finish. Select Setup Digital TV to install digital satellite channels
through the next steps in the Installation Wizard. Select Finish if you want
to install digital satellite channels at another time and directly to go to the
Android menu.
9