Setup Dtv First Installation - Strong SRT 2121 User Manual

4.1 Setup DTv first Installation

Step 1:
This menu allows you to select your screen setting and the preferred audio setting.
Picture size:
Zap Mode:
Subtitle:
Select Next and confirm with OK to go to step 2.
Step 2:
This menu allows you to select a normal satellite search or to load a channel list.
Satellite Search:
Load channel list from USB:
Load channel list from Internet:
Load preset list Germany:
Note
After the above steps have been made the receiver will go into viewing mode and you can use and
enjoy it. Should some steps not be set as you wish or if you like to restart the wizard, you can do
so from the DTV part. Please press
System and Factory Reset. After entering the PIN code the unit is set back to default and all previous
channels and settings will be deleted. The unit will return to the first installation wizard of DTV.
Note
10
Select Full for the official size or Auto to adjust size to your screen.
Select Black Screen to get a black screen between zapping through the
channels. Select Hold Screen to hold the last watched screen between
zapping through the channels.
Select Off or the subtitle language you like to display.
Press OK to enter this menu in which you can select and search on satellites
of your choice. Default is set to ASTRA 19.2 on DiSEqC port 1. Use pq if you
like to select another satellite and press OK to select or unselect. To modify
settings you can press u to enter. When all is set as you wish, press the bLuE
button Scan to start the search process. Press OK again to start.
Select this option if you like to load a channel list which has been made
before and was saved as backup on a USB stick.
Select this option if you like to load a channel list from the Internet. This
option is only available when the website is informing so.
Select this option if you like to load the channel list from ASTRA 19.2 made for
German users including most important channels.
Over time, channels can be moved to other frequencies, completely
disappear and new channels can appear. Please add these manually if you
miss them or check our website www.strong.tv for latest updates.
and select DTV settings and confirm with OK to enter. Select
The Android part is kept as it is and will not be restored to default.
Restoring Android to default can be done in the Android system settings
menu itself and will reset everything, including DTV.