Accessing The Electronic Program Guide (Epg); Accessing The Favourite Channels; Trouble Shooting - Strong Srt Ant 10 Eco User Manual

PART 1 • English
Selection by on-screen channels list
You can also select the required channel directly from on-screen channel list. To call up the channel
list, oK in viewing mode. Alternatively, the list can be displayed using the receiver's main menu. See
chapter 5.1.1 TV Channel list in this manual for operation details.
Selection via EPg
You can also select the required channel directly from electronic programme guide (EPG).
To display the EPG, press EPg on remote control. See chapter 6.2 below for details.

6.2 Accessing the Electronic Program guide (EPg)

1. Press EPg to enter EPG menu.
2. Use the numeric button 2 to switch the highlight between channel list, events
schedule of the selected channel and now/next events.
3. In the event schedule, press the numeric button 3 to book a timer for the highlighted
event. Press oK to open the Detail menu for the selected event.
4. Press the numeric button 1 to open the Booking list menu.

6.3 Accessing the favourite channels

1. In viewing mode, press fAv to enter the favorite group menu.
2. Use pq to select the desired favourite group.
3. Press oK to enter the favourite channels list, and use pq to select the desired channel.

7.0 TRoUblE ShooTIng

There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your local Service line or STRONG dealer. Alternatively you can send a support mail via our website:
www.strong.tv. Do noT open the receiver cover. It may cause a dangerous situation and will void
the warranty.
Problem
LED indicator not lit,
No signal found
No picture or sound
on TV
Scrambled channel
message
Possible cause
Mains lead unplugged
Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Active antenna requires to
switch ON antenna power/
external power
Scart/ AV is not selected on
your TV
TV is not switched on
Channel is scrambled
What to do
Check mains plug
Check aerial lead
Check aerial
Check with dealer
Switch receiver's Antenna Power ON/
connect external power
Switch to correct TV input
Switch TV on
Select alternative channel
13