Connecting The Antenna; Coaxial Cable - Strong Srt Ant 10 Eco User Manual

4. CONNECTING THE ANTENNA

Check if the broadcast in your country is horizontal or vertical polarized.
„ „
Click the antenna in the plastic holder as shown in the pictures:
„ „
(H-Broadcast) antenna
Disconnect your Digital Receiver from the 230 V main power.
„ „
Connect the supplied RF cable to the antenna: carefully press the inner lead of the
„ „
cable into the Female-F connector at the back of the antenna. Turn the covering
nut clockwise with your HANDS until it is fixed.
Connect the other side of the RF cable to your Digital Terrestrial Receiver. Normally
„ „
the input connector on your receiver is marked as "ANT" (in) or as "RF" (in).
Connect your Digital Receiver to the 230 V main power.
„ „
DC Outlet
AC Adaptor
(DC 12 V)
(Optional)
5. INSTALLATION OF THE ANTENNA
1. Turn on your TV set and turn on your Digital Terrestrial Receiver.
2
mounted H
Rear View
Coaxial
Cable
(V-Broadcast) antenna
mounted V (Upright)
SCART cable
Digital Set Top Box
SRT ANT 10 ECO
TV