1. Manuals
  2. Brands
  3. Strong Manuals
  4. Receiver
  5. SRT 6202
  6. User manual

Strong SRT 6200 User Manual

Digital satellite receiver
Hide thumbs Also See for SRT 6200:
Table of Contents

Advertisement

Quick Links

Digital Satellite Receiver
SRT 6200/SRT 6202/SRT 6205
User Manual
1.00
SRT 6202/6205
SRT 6205

Advertisement

Table of Contents
loading

Related Manuals for Strong SRT 6200

Summary of Contents for Strong SRT 6200

  • Page 1 Digital Satellite Receiver SRT 6200/SRT 6202/SRT 6205 User Manual 1.00 SRT 6202/6205 SRT 6205...

  • Page 4: Table Of Contents

    6.0 WATChIng Tv AnD lISTEnIng To ThE RADIo A.1 TRoUblE ShooTIng A.2 SPECIfICATIonS STRong declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; RohS 2002/95EEC * €0,14/Min. from German wired line * €0.42/Min.

  • Page 5: Introduction

    PART 1 • English 1.0 InTRoDUCTIon 1.1 Safety Instructions Do noT InSTAll YoUR RECEIvER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots. Do noT EXPoSE ThE RECEIvER oR ITS ACCESSoRIES: To direct sunlight or near any other equipment that generates heat;...

  • Page 6: Equipment Set-Up

    It is advised not to store important information on USB storage devices used with the receiver. Always make backups of data on USB storage device before usage with receiver. STRONG will not take responsibility for any loss of information or circumstances caused by loss of information.

  • Page 7: Remote Control Unit

    PART 1 • English 5. Tv SCART To connect to your TV set using a SCART cable. 6. vCR SCART To connect to your DVD or video recorder using a SCART cable. The video signal will be looped through to your TV set if receiver is in stand-by mode.** 7.

  • Page 8: Default Pin Code: 0000

    PART 1 • English Recording No function Play Fast backward Fast forward Stop 2.3 Default PIn code: 0000 3.0 ConnECTIonS 3.1 basic connection with SCART cable Fig. 4 3.2 Connecting to Satellite Dish Connecting a fixed satellite dish to your receiver (Fig. 5) Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch (Fig.

  • Page 9: Antenna Mode

    PART 1 • English LNB Type, LNB Low Freq, LNB High Freq, Band control, Polarisation control, DiSEqC Switch and Antenna mode. 4.3 Antenna mode a) fixed dish Set Antenna mode to Fixed, select NEXT and press oK. The Adjust antenna screen appears. Select a transponder receivable at your location and adjust the antenna position for maximum signal strength and quality levels.

  • Page 10: Installation

    PART 1 • English rate, Video PID, Audio PID. Press pq to highlight the desired channel, press tu to highlight Move channel “Move” and press oK to confirm selection of the channel. Use pq to move the channel to its new location and press oK to confirm. Repeat this for every channel you want to move.

  • Page 11: Manual Scan

    PART 1 • English Use blUE to set the scan type to NIT OFF or NIT ON if Blind Scan is set to OFF or to Quick Search or Detail Search if Blind Scan is set to ON. Once set-up is completed, press RED to start the scan. 5.2.3 Manual Scan In Manual Scan you can scan a single transponder, add a new transponder, edit or delete a transponder.

  • Page 12: Auto Standby

    Select this option in order to update your receiver with the latest software version. Software update service is available from satellite ASTRA 19.2E. note: If needed, parameters can be changed. Please ask your local STRONG dealer in case software update was not successful.
  • Page 13 PART 1 • English a) Download the required update file for your receiver model from our website www. strong.tv > Support b) Unzip the file, copy it to your USB device and connect it to the USB port of receiver.

  • Page 14: Watching Tv And Listening To The Radio

    USB disk (all partitions). Format functions will delete all records, data and information from your USB device. STRONG will not take any responsibility for damaged or lost data on the USB device. USb Preference. In this menu you can enable/disable use of Timeshift function, enable/disable recording by one time press to REC button and set default recording period in hours (HH:MM) format.

  • Page 15: Recording Information

    PART 1 • English To view technical information about the current channel, press Info twice. In Program Information menu the receiver will display the current program information such as satellite name, program name and number, local frequency, polarity, 22K tone, DiSEqC, down frequency, symbol rate, video PID and audio PID and also the signal strength and signal quality of the current program.

  • Page 16: Trouble Shooting

    PART 1 • English 6.6 TElETEXT function Press TEXT in normal viewing mode and pq to increase or decrease the displayed page number. Use numeric buttons to input a page directly. 6.6 Subtitles function Press SUb in normal viewing mode. If the current channel broadcasts subtitle information, the Subtitle Language selection menu will appear.

  • Page 17: Specifications

    PART 1 • English Cause Remedy No picture The receiver can’t receive the signal Check the antenna cable, replace the cable, or connect the cable to the receiver tightly. Incorrect values of some tuner Set the values of the tuner parameters.

Table of Contents