Remote Control; Default Pin- Code: 0000; First Time Installation; Main Menu - Strong Srt Ant 10 Eco User Manual

3.3 Remote Control

1. q
2. !
3. Pg+/Pg-
4. DTv/vCR
5. Info
6. vol+/vol-
7. mEnU
8. EXIT
9. pq
10. tu
11. oK
12. RECoRD
13. TImEShIfT
14. 0~9
15. EPg
16. RECAll
17. AUDIo
18. Tv/RADIo
19. fAv
20. fIlE
21. TTX
22. SUbTITlE
23. 5 6
24. ColoURED bUTTonS

3.4 Default PIn- code: 0000

4.0 fIRST TImE InSTAllATIon

If you use the receiver for the first time, the Easy Install menu appears. Use qp to select Region, OSD
Language, Antenna Power and Scan Mode and tu to select options. Then use the qp buttons to
move focus to Search and press oK to proceed with the automatic channel scan.

5.0 mAIn mEnU

In viewing mode press mEnU at any time to enter the Main Menu. It consists of the following
submenus: Channel, Installation, Setup, Tools and Media+

5.1 Channel

1. Use the qp buttons to select Channel and press oK to enter.
2. Use the qp buttons to highlight the desired item and press oK to select.
6
Turns the receiver On/Standby
Mutes audio output of the receiver
Page up/down
No function
Shows the actual channel information
Volume up/down
Opens the main menu/In menu you will get one step back
Exits from the menu or sub-menu
Menu On: Moves the cursor up/down.
Menu Off: Change channel to previous/next.
Menu On: Change settings for specific Menus
Menu Off: Increases/decreases the volume level.
Menu On: Activates the highlighted menu item.
Menu Off: Displays the current channel list
No function
No function
Channel selection or value input
Shows the EPG (Electronic Program Guide) in TV mode
Back to previous shown channel
Sets the current audio channel to left, right or stereo
Toggles between TV or RADIO mode
Favourite group selection
no function
Shows Teletext on OSD (On Screen Display)
Shows list of subtitled languages
Rewind/Fast forward of video files
for Teletext and other functions
PART 1 • English
Fig. 4