Timer Setting - Strong Srt Ant 10 Eco User Manual

Region:
GMT Usage:
The options are:
GMT Offset:
Date/Time:
Time Display:

5.3.5 Timer Setting

In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number:
Timer Mode:
Timer Service:
Wake-up Channel:
Month/Date/Day:
Time:
When you leave the programme timer, a saving window appears. Use tu to select Yes in the
confirmation window and press oK to save or select No to cancel.
Duration:
Sleep Timer
You can set the receiver to power OFF in 10 min, 30min, 60min, 90min and 120min automatically.
5.3.6 oSD Setting
This menu allows you to change settings for: Subtitle Display, OSD Transparency and Load Default
OSD Setting.
Subtitle Display:
OSD Transparency:
OSD Timeout:
Load Default OSD Setting:
5.3.7 Parental lock
This menu allows you to protect the installation menu or channels with a password. You can also
change the Password here. When entering the menu you will be asked to input the password
(default:0000).
Menu Lock:
Channel Lock:
New Password:
Confirm Password:
10
This menu is used for changing the region setting.
This setting allows you to switch the usage of GMT time on or off.
Off / User Define / By Region
This menu is valid only when User Define is selected in GMT Usage menu.
The GMT offset range is -11:30 ~ +12:00, increasing by half hours
progressively.
Date and Time menus are valid only when Off is selected in GMT Usage
menu. Press OK followed by numbers to change the date and time.
This menu allows to control whether the time is displayed on screen or not.
The options are: Off/On.
You can set up to 8 timers
Off/Once/Daily/Weekly/Monthly
TV Service/Radio Service
You can select any channel as wake-up channel.
Use pq to select the start month, date and day.
Press oK to input the time with the numeric buttons.
Press oK to input the timer duration with the numeric buttons.
To set the subtitle to Standard or OFF.
To set the OSD transparency from Off ~ 50%.
To define how long the information banner is to be shown (5S~10S)
To clear all OSD settings and reset to default value.
Locks the installation menu. You can set menu lock to ON/OFF.
Off/Manual/Age: 4 - Age: 18
Input your new password here to change the password.
Input your new password again to confirm the new password.
PART 1 • English