Tools - Strong Srt Ant 10 Eco User Manual

PART 1 • English
5.3.8 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto Standby is ON.
The receiver will switch to standby automatically when it doesn't receive commands from the remote
control for three hours. To avoid the automatic switch off, set Auto Standby to OFF.

5.4 Tools

Press mEnU to enter Main Menu. Select Tools with the pq buttons and press oK to enter.
1. Use pq to highlight the desired menu and press oK to enter.
2. Press EXIT to leave.
5.4.1 Receiver Information
This menu displays relevant Receiver information like the Receiver Model, Software version,
Signature, and our website www.strong.tv.
1. In Tools menu, select Receiver Information and press oK to open receiver information.
2. Press EXIT to leave.
5.4.2 game
This menu allows you to play games (Tetris, Snake and Othello) on this receiver.
1. Select "Game" in Tools menu and press oK to enter the game menu.
2. Use pq to select a desired game, and press oK to enter the game. Highlight Start
and press oK to start the game. For changing levels highlight Setup and use the tu
buttons.
3. Press EXIT to quit the game.
noTE:
5.4.3 load factory Default
This option allows you to reset the receiver to factory settings, which clears all stored channels and settings.
WARnIng:
1. Enter Tools menu, select Load Factory Default and press oK button. You are asked to
input your password.
2. Input the correct password using the numeric buttons (the default password is
"0000"). A confirmation window will be displayed.
3. Select Yes to return back to factory settings and clear all channels. Select No to cancel.
4. Press EXIT button to exit.
5.4.4 Software Upgrade
1. Enter Tools menu, select Software Upgrade and press oK button. The Software Upgrade
menu is shown.
2. Use pq to select Upgrade by Storage and press oK. You are asked to input password.
3. Input the correct password (the default password is 0000). The Software Upgrade
submenu will be opened. Then select the correct software file and press oK to start.
You can also press oK to pause playing.
This option will permanently delete all your settings and channel lists and set
your receiver to factory default! Please use with caution.
11