Media; Operation; Changing Channels - Strong Srt Ant 10 Eco User Manual

A message will be displayed to confirm the update process. Select Yes to confirm or
No to cancel.
4. Press EXIT button to leave.
WARnIng:
noTE:

5.5 media+

Select Media+ and press oK to enter Media+ menu.
1. Press mEnU to enter the main menu. Select Media+ and press oK to enter the menu.
2. Use pq to highlight the desired menu and press oK to enter.
3. Press EXIT to leave Media+.
Use the two button rows in bottom of your remote control for Player operation. A help screen
showing how to use the buttons will be displayed on screen.
5.5.1 media Player
This function allows you to play MPEG1 and MPEG2 video, Audio and Photo files from a connected
USB device.
1. In Media+ menu, select Media Player and press oK to enter the menu.
2. Use pq to select the desired item, and press oK or PlAY to play the desired files.
3. Press EXIT to quit.
5.5.2 Safely Remove Storage Device
In Media+ menu, select Safely Remove Storage Device and press oK to safely remove the USB device.
A message indicating that the device can be removed, will be displayed.

6.0 oPERATIon

6.1 Changing Channels

There are 4 ways of channel selection: stepping through the channel list, selection by number, from
the on-screen channel list, and using the electronic programme guide (EPG).
Stepping through the channel list
To move through the channel list, use the pq buttons on the remote control.
Selection by direct channel number input
Enter the channel number directly by using numeric buttons, and press the oK button to select
the channel.
12
After an update the receiver restarts automatically! During this process
nEvER disconnect the receiver from the mains or switch OFF the power! This
can damage your receiver and will void the warranty.
This receiver is equipped with an over the air update function, which might
not be operational in your broadcast region. For further details visit our
website www.strong.tv or contact your local Service line.
PART 1 • English