Ntp Configuration Menu (Sip Phones Only); Ui Configuration Menu - Cisco 7971G-GE - IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-10 Locale Configuration Menu Options (continued)
Option
Network Locale Version Version of the network locale loaded on the
NTP Configuration (SIP
phones only)

NTP Configuration Menu (SIP Phones Only)

The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP phones.
Table 4-11 NTP Configuration Menu Options
Option
NTP Server 1
NTP Server 2
NTP Mode 1
NTP Mode 2

UI Configuration Menu

The UI Configuration menu displays the status of various user interface features on the phone.
Table 4-12
Table 4-12 UI Configuration Menu Options
Option
Auto Line Select
BLF for Call Lists
OL-15299-01
Description
phone.
Provides access to the NTP Configuration Menu.
For more information, see the
Configuration Menu (SIP Phones Only)" section
on page 4-17
Table 4-11 describes the options on this menu.
Description
IP address of the primary NTP server.
IP address of the secondary or backup NTP
server.
Primary server mode. Supported modes are
Directed Broadcast and Unicast.
Secondary server mode. Supported modes are
Directed Broadcast and Unicast.
describes the options on this menu.
Description
Indicates whether the phone shifts the call focus
to incoming calls on all lines.
When this option is disabled, the phone only
shifts the call focus to incoming calls on the line
that is in use. When this option is enabled, the
phone shifts the call focus to the line with the
most recent incoming call.
Default: Disabled
Indicates whether the Busy Lamp Field (BLF) is
enabled for call lists.
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
To Change
Display only—Cannot configure.
Display only—Cannot configure.
"NTP
To Change
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
Device Configuration Menu
4-17