S
UPER P3TDLR User's Manual
Peripheral Device Configuration
Onboard SCSI
This option allows you to enable the onboard SCSI. The settings are En-
abled and Disabled.
Power Lost Control
This option determines how the system will respond when power is reap-
plied after a power loss condition.
automatically start up when power is reapplied.
must push the main power button to restart the system after power is
restored.
Processor Configuration
This option enables or disables the AMIBIOS to detect the serial number(s)
of the processor(s).
System Health Monitor
The BIOS continuously monitors the health of your system by measuring
certain voltage levels and temperatures.
System Overheat Warning
This option allows you to Enable or Disable a system overheat warning
signal, used to notify you in the event of a dangerous rise in heat levels.
Overheat Warning Temperature
This option allows you to specify the temperature threshold that, when
exceeded, will trigger the overheat warning alarm.
The rest of the Health Monitor menu lists various voltages and temperatures
as they are currently being measured. These include CPU temperature, CPU
voltage, the rpms of the fans (CPU, chassis and thermal control) as well as
the primary voltage levels used by the system: +3.3V, +5V, +12V and -12V.
Always On means the system will
The settings are Disabled and Enabled.
4-14
"Always Off" means you