Table of Contents
Advertisement
S
P3TDLR User's
UPER
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors.
See Figure 5-1 for the pin locations of the various front control panel
buttons and LED indicators. Please note that even and odd numbered
pins are on opposite sides.
All JF1 wires have been bundled into a single ribbon cable to simplify
this connection. Make sure the red wire plugs into pin 1 as marked on
the board. The other end connects to JP4 of the Control Panel PCB
board, located just behind the system status LEDs on the chassis.
The control signals are all on the even numbered pins. See pages 5-
12 to 5-14 for details and pin descriptions.
In addition to the 2-pin Power LED header on JF1, there is a 3-pin
header for the same function at JP61 on the motherboard, which is
located near JF1.
JP61
Manual
Figure 2-1. Control Panel Header Pins
Power LED (pins 1-3)
Power LED (pins 15-16)
HDD LED (pins 13-14)
NIC1 LED (pins 11-12)
NIC2 LED (pins 9-10)
Overheat LED (pins 7-8)
X (Key)
Reset Button (pins 3-4)
Power Button (pins 1-2)
2
1
JF1
2-4
Advertisement
Table of Contents
