Event Log Configuration
Event Logging
This option Enables or Disables the logging of events. You can use this
screen to select options for the Event Log Configuration Settings. You can
access sub screens to view the event log and mark all events as read. Use
the up and down arrow keys to select an item, and the plus (+) and minus
(-) keys to change the option setting. The settings are described on the
following pages. The screen is shown below.
ECC Event Logging
This option Enables or Disables the logging of ECC events.
logged by AMIBIOS are post errors such as a bad BIOS, floppy errors, or
hard drive errors.
Clear All Event Logs
This option can be used to tell the system to clear the event log on the next
boot up. The settings are No and Yes.
Peripheral Device Configuration
Power Lost Control
This option determines how the system will respond when power is reap-
plied after a power loss condition.
return to the previous state when power is reapplied.
you must push the main power button to restart the system after power is
restored.
Choose Last State to automatically
4-13
Chapter 4: AMIBIOS
The events
Always Off means