1. Manuals
  2. Brands
  3. Supero Manuals
  4. Motherboard
  5. PDSLM
  6. User manual

Supero PDSLM User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PDSLM
USER'S MANUAL
Revision 1.0a

Advertisement

Table of Contents
loading

Related Manuals for Supero PDSLM

Summary of Contents for Supero PDSLM

  • Page 1 PDSLM USER’S MANUAL Revision 1.0a...
  • Page 2 The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates.

  • Page 3: Manual Organization

    Intel's web site for processor support. This product is intended to be professionally installed. Manual Organization Chapter 1 describes the features, specifi cations and performance of the PDSLM motherboard and provides detailed information about the chipset. Chapter 2 provides hardware installation instructions. Read this chapter when in- stalling the processor, memory modules and other hardware components into the system.

  • Page 4: Table Of Contents

    Overview ......................1-1 Checklist ..................... 1-1 Contacting Supermicro ................1-2 PDSLM Image ................1-3 PDSLM Layout ................1-4 PDSLM Quick Reference ............1-5 Motherboard Features ................1-6 System Block Diagram ................1-8 Chipset Overview ................... 1-9 PC Health Monitoring ................... 1-10 Power Confi...
  • Page 5 Table of Contents System Reset Switch ................2-18 Power Switch ..................2-18 Error LED ....................2-19 Message LED ..................2-19 HDD LED ....................2-20 Power LED ....................2-20 Connecting Cables ..................2-21 Main Power Connector ................. 2-21 External Power Connector ............... 2-21 Internal Buzzer (Speaker Connector) ............
  • Page 6 PDSLM User’s Manual Boot Settings ....................4-15 Exit Options ....................4-16 Appendices: Appendix A: BIOS Error Beep Codes ...............A-1 Appendix B: BIOS POST Codes ................B-1 Appendix C: Installing Software Programs and Drivers ..........C-1...

  • Page 7: Chapter 1: Introduction

    Chapter 1: Introduction Chapter 1 Introduction Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry. Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Please check that the following items have all been included with your motherboard.

  • Page 8: Contacting Supermicro

    PDSLM User’s Manual Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V.

  • Page 9: Pdslm Image

    Chapter 1: Introduction PDSLM Image Note: All images and layouts shown in this manual were based upon the latest PCB Revision available at the time of publishing of this manual. The motherboard you've received may or may not look exactly the same as the graphics shown in...
  • Page 10 PDSLM User’s Manual Motherboard Layout (not drawn to scale) FAN2 Intel mPGA478 SOCKET Intel 945GME North Bridge JDIMM2 JDIMM1 Intel ICH7M CTRL SATA2 South Bridge Super I/O SATA0 USB 2/3 Battery JPS1 Audio Buzzer BIOS CTRL PCI 33MHZ Important Notes to the User •...

  • Page 11: Pdslm Quick Reference

    Chapter 1: Introduction PDSLM Quick Reference (See Chapter 2 for details.) Jumpers Description Default Setting JCMOS1 CMOS Clear Pins 1-2 (Keep CMOS) JSPKR1 Internal Speaker (Buzzer) Enabled On (Enabled) Connectors Description 4-Pin Power (J11) 12V 4-Pin Power Connector (used for the motherboard)

  • Page 12: Motherboard Features

    PDSLM User’s Manual Motherboard Features Latest CPU technology! • Single Intel Core2 Duo or Core Solo Processor with a Front Side Bus speed of up to 667 MHz with support of 2 MB of L2 Cache • Housed in a Micro Flip-Chip Pin Grid Array (Micro-FCPGA) package in the mPGA478M socket, supporting the latest Intel CPU Technology.
  • Page 13 Chapter 1: Introduction BIOS Features • 8 Mb Flash EEPROM AMI BIOS • Plug and Play (PnP), APM 1.2, DMI 2.3, ACPI 1.0/2.0, BIOS rescue hot keys, USB Keyboard support, Hardware BIOS Virus Protection, SMBIOS 2.3, and RTC (Real Time Clock) Power Confi...

  • Page 14: Motherboard Block Diagram

    PDSLM User’s Manual Intel uFCP GA DD R2 SO -DIMM Intel Dual Channel D DR 2 D-sub analog DD R2 SO -D IMM 667/533/400 MHz VGA R /G/B 945GME connector DMI x4 PCI- E x1 Intel 82573L 1x PC I S lot...

  • Page 15: Chipset Overview

    Chapter 1: Introduction Chipset Overview The Intel 945GME Express chipset, designed for use with the Intel Core2 DuoCore Solo Processor in the Micro Flip-Chip Pin Grid Array Package, consists of the Generation 3.5 Intel Integrated Graphics Engines and the Intel Graphics Media Accelerator 950, providing unparalleled graphics support for gaming and desktop displays.

  • Page 16: Pc Health Monitoring

    PDSLM User’s Manual PC Health Monitoring This section describes the PC health monitoring features of the PDSLM. The motherboard has an onboard System Hardware Monitor chip that supports PC health monitoring. Onboard Voltage Monitoring The onboard voltage monitor will scan these voltages continuously: CPU Core Voltages, Memory (+1.8V), Chipset (+1.5V), +3.3V, +3.3V Standby, +5V, +5V...

  • Page 17: Chapter 2: Installation

    Chapter 2: Installation Chapter 2 Installation Static-Sensitive Devices Electro-Static-Discharge (ESD) can damage electronic com ponents. To prevent damage to your system board, it is important to handle it very carefully. The following measures are generally suffi cient to protect your equipment from ESD. Precautions •...

  • Page 18: Processor/Heatsink Installation And Removal

    PDSLM User's Manual Processor/Heatsink Installation and Removal When handling the processor package, avoid placing direct pressure on the label area of the fan. Notes: 1. Always connect the power cord last and always remove it before adding, removing or changing any hardware components. Make sure that you install the processor into the CPU socket before you install the CPU heatsink.
  • Page 19 Chapter 2: Installation 3. Insert the four bracket lock align- ments into the four mounting holes on the back of the motherboard. 4. Once the heatsink bracket is prop- erly seated on the motherboard, turn Heatsink bracket properly seated on the MB the motherboard upside down so that the front side of the motherboard is facing up.
  • Page 20 PDSLM User's Manual Installing the Passive Heatsink fasteners 1. Position the heatsink in such a way that will provide best airflow to the chassis or the motherboard. Using Phillip 1 2. Align the four heatsink fasteners with screwdriver, install the four lock alignments on heatsink the diagonal pairs bracket.
  • Page 21 Chapter 2: Installation Removing the CPU 1. Unplug the power cord from the power sup- ply. 2. Disconnect the CPU fan wire from the CPU fan connector. 3a. Using a Philip 1 screwdriver, gently turn the diagonal pairs of fasteners counter-clockwise to loosen them.

  • Page 22: Mounting The Motherboard In The Chassis

    PDSLM User's Manual Mounting the Motherboard in the Chassis All motherboards have standard mounting holes to fi t different types of chassis. Make sure that the locations of all mounting holes for the motherboard and the chas- sis match. Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly recommended because they ground the motherboard to the chassis.

  • Page 23: Installing Ddr2 Memory

    Chapter 2: Installation Installing DDR2 Memory Memory Support The PDSLM supports up to 4 GB of Dual channel, Non-ECC unbuffered DDR2 667/533/400 SDRAM. Important Notes on Memory Support Note: Due to memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used.
  • Page 24 PDSLM User's Manual Memory Module Installation and Removal Exercise extreme care when installing or removing memory modules to prevent any possible damage. Note 1: SO-DIMMA (JDIMM1) is DIMM Slot 1, SO-DIMMB (JDIMM2) is DIMM Slot 2. Note 2: When one memory module is used, install it in DIMM Slot 1 (SO-DIMMA or JDIMM1) fi...

  • Page 25: Connectors And I/O Ports

    Chapter 2: Installation Connectors/IO Ports The I/O ports are color coded in conformance with the PC 99 specifi cation. See Figure 2-3 below for the colors and locations of the various I/O ports. A. Back Panel Connectors and IO Ports Line-in (Blue) Line-out (Green) Microphone (Pink)

  • Page 26: Atx Ps/2 Keyboard And Ps/2 Mouse Ports

    PDSLM User's Manual ATX PS/2 Keyboard and PS/2 Keyboard/Mouse Pin PS/2 Mouse Ports Defi nitions PS2 Keyboard PS2 Mouse The ATX PS/2 keyboard and PS/2 Pin# Defi nition Pin# Defi nition mouse are located next to the Back KB Data Mouse Data Panel Video Port on the motherboard.

  • Page 27: Video (Vga/Crt) Connector

    Chapter 2: Installation Video (VGA/CRT) Connector A Video (VGA/CRT) connector is located below the COM Port1 on the IO backplane. This connector is used to provide video and CRT display Refer to the board layout below for the location. 1. Video (VGA/CRT) (Blue) 2-11...

  • Page 28: Serial Ports

    PDSLM User's Manual Serial Ports Serial Ports-COMA/COMB Pin Defi nitions Two COM connections (COM-A & Pin # Defi nition Pin # Defi nition COM-B) are located on the mother- board. COM-A (J17) is located above the Video port (VGA) on the Backplane IO panel.

  • Page 29: Universal Serial Bus (Usb)

    Chapter 2: Installation Universal Serial Bus (USB) Back Panel USB 0/1 (J3) Two Universal Serial Bus ports (USB Pin# Defi nition Pin# Defi nition 0 and USB 1) are located at J3 below the GLAN port on the I/O back panel. USB_PN1 USB_PN0 Additionally, two USB ports (USB 2...
  • Page 30 PDSLM User's Manual Gigabit LAN (Ethernet) Port GLAN Port (J3) Pin Defi nition A Gigabit Ethernet port (GLAN) is Pin# Defi nition located at J3 above the USB ports on P2V5SB SGND the IO backplane. This port accepts TD0+ Act LED RJ45 type cables.

  • Page 31: Ac'97 Audio

    Chapter 2: Installation AC'97 Audio Blue: Line-in(surround sound AC'97 provides high quality onboard audio L/R) connection (J7) on the I/O Backplane. This motherboard features a 6-channel sound for Green: Line-out (Front L/R) front L&R, rear L&R, center and subwoofer speakers. You can activate this function Pink Mic-in (Center/ through an advanced software program subwoofer)

  • Page 32: B-1 Front Control Panel

    PDSLM User's Manual B-1. Front Control Panel JF1 contains header pins for various buttons and indicators that are normally located on a control panel at the front of the chassis. These connectors are designed specifi - cally for use with Supermicro server chassis. See Figure 2-4 for the descriptions of the various control panel buttons and LED indicators.

  • Page 33: B-2. Front Control Panel Pin Defi Nitions

    Chapter 2: Installation B-2. Front Control Panel Pin Defi nitions System Beep System Beep The System Beep connection is Pin Defi nitions (JF1) located on pins 19 and 20 of JF1. Pin# Defi nition Refer to the table on the right for pin P3V3SB defi...

  • Page 34: System Reset Switch

    PDSLM User's Manual System Reset Switch Reset Switch Pin Defi nitions (JF1) The Front Panel System Reset Switch Pin# Defi nition connection is located on pins 13 and Reset Switch 14 of JF1. See the table on the right Ground for pin defi...

  • Page 35: Error Led

    Chapter 2: Installation Error LED (CPU Overheat Error LED Pin Defi nitions (JF1) LED) Pin# Defi nition Connect an LED cable to the Error P3V3SB LED connection on pins 9 and 10 of Error LED JF1 to provide warnings when the CPU temperature exceeds a pre-de- fi...

  • Page 36: Hdd Led

    PDSLM User's Manual HDD LED The HDD LED connection is located HDD LED on pins 4 and 5 of JF1. Attach the Pin Defi nitions (JF1) hard drive LED cable here to display Pin# Defi nition disk activity (for any hard drives on...

  • Page 37: Connecting Cables

    Chapter 2: Installation Connecting Cables This section provides brief descriptions and pin-out defi nitions for onboard headers and connectors. Be sure to use the correct cable for each header or connector. • For information on FP USB (USB 2/3), please see Page 2-13. •...

  • Page 38: Internal Buzzer (Speaker Connector)

    PDSLM User's Manual Internal Buzzer Internal Buzzer (SP1) The Internal Buzzer, located at SP1, Pin# Defi nitions can be used to provide audible indica- Pin 1 Pos. (+) Beep In tions for various beep codes when- Pin 2 Neg. (-) Alarm JSPKR1 is set to Enabled.

  • Page 39: Fan Headers

    Chapter 2: Installation Fan Headers The PDSLM has two fan headers (Fan1 and Fan2). Fan1 is used for CPU cooling. Fan2 is used as a chassis fan. Both fans Fan Header Pin Defi nitions are 4-pin fan headers. However, Pins 1-3...

  • Page 40: Jumper Settings

    PDSLM User's Manual Jumper Settings Explanation of Jumpers To modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1 is identifi ed with a square solder pad on the printed circuit board.

  • Page 41: Cmos Clear

    Chapter 2: Installation CMOS Clear CMOS Clear Jumper Settings JBT1 allows the user to reset the CMOS Jumper Defi nition settings to the default values after each Pins 1-2 Keep CMOS BIOS update. Please turn off the com- Pins 2-3 Normal Opera- puter, remove the AC power cord, and tion...

  • Page 42: Onboard Indicators

    PDSLM User's Manual Onboard Indicators GLAN Right Left GLAN LEDs A Gigabit LAN port (J3) is located on top of the USB Ports 0/1 on the IO Backplane. GLAN LED (Rear View: This Gigabit Ethernet LAN port has two When view- LEDs.

  • Page 43: Onboard Power Led

    Chapter 2: Installation Onboard Power LED An Onboard Power LED is located at DP1 Onboard PWR LED Indicator on the motherboard. When DP1 is off, the LED Color Defi nition system is off. When the green light is on, the System Off AC power cable is connected.

  • Page 44: Sata Connectors

    PDSLM User's Manual Serial ATA and Hard Disk Drive Connections Note the following conditions when connecting the Serial ATA and hard disk drive cables: • Be sure to use the correct cable for each connector. Refer to Page 1-1 for cables that came with your shipment.

  • Page 45: Ide Connector

    Chapter 2: Installation IDE Connector IDE Drive Connectors Pin Defi nitions (JIDE) An IDE Connector is located at JIDE1 Pin# Defi nition Pin # Defi nition on the motherboard. This 44-pin con- Reset IDE Ground nector provides support for 2.5" hard Host Data 7 Host Data 8 drive disks.
  • Page 46 PDSLM User's Manual Notes 2-30...

  • Page 47: Chapter 3: Troubleshooting

    Chapter 3: Troubleshooting Chapter 3 Troubleshooting Troubleshooting Procedures Use the following procedures to troubleshoot your system. If you have followed all of the procedures below and still need assistance, refer to the ‘Technical Support Procedures’ and/or ‘Returning Merchandise for Service’ section(s) in this chapter. Always disconnect the AC power cord before adding, removing, changing or install- ing any hardware components.

  • Page 48: Memory Errors

    PDSLM User's Manual NOTE If you are a system integrator, VAR or OEM, a POST diagnostics card is recommended. For I/O port 80h codes, refer to App. B. Memory Errors 1. Make sure that the DIMM modules are properly installed and fully seated in the slots.

  • Page 49: Frequently Asked Questions

    2, or by fax at (408)503-8019. Frequently Asked Questions Question: What type of memory does my motherboard support? Answer: The PDSLM supports up to 4 GB of unbuffered, Non-ECC DDR2- 677/533/400, two-way interleaved or non-interleaved SDRAM. See Section 2-4 for details on installing memory.

  • Page 50: Returning Merchandise For Service

    PDSLM User's Manual Warning : Do not shut down or reset the system while updating BIOS to prevent possible system boot failure!) Question: What's on the CD that came with my motherboard? Answer: The supplied compact disc has quite a few drivers and programs that will greatly enhance your system.

  • Page 51: Chapter 4: Bios

    BIOS Introduction This chapter describes the AMI BIOS Setup Utility for the PDSLM. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter de- scribes the basic navigation of the AMI BIOS Setup Utility setup screens.

  • Page 52: Main Setup

    PDSLM User’s Manual Main Setup When you fi rst enter the AMI BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS Setup screen is shown below.

  • Page 53: Advanced Setup

    Chapter 4: AMI BIOS Advanced Setup Use the arrow keys to select Advanced Setup and hit <Enter> to access the sub- menu items: BIOS Settings Confi guration Quick Boot If Enabled, this option will skip certain tests during POST to reduce the time needed for system boot.
  • Page 54 PDSLM User’s Manual Power Loss Control The feature allows the user to set the power state after a power outage. Select Power-Off for the system power to remain off after a power loss. Select Power-On for the system power to be turned on after a power loss. Select Last State to allow the system to resume its last state before a power loss.
  • Page 55 Chapter 4: AMI BIOS Primary IDE Master/Slave, Third IDE Master and Fourth IDE Master These settings allow the user to set the parameters of Primary IDE Master/Slave, Third IDE Master, and Fourth IDE Master slots. Hit <Enter> to activate the following submenu items for detailed options of these items.
  • Page 56 PDSLM User’s Manual DMA Mode Select Auto to allow the BIOS to automatically detect the DMA mode. Use this value if the IDE disk drive support cannot be determined. Select SWDMA0 to allow the BIOS to use Single Word DMA mode 0. It has a data transfer rate of 2.1 MBs.
  • Page 57 Chapter 4: AMI BIOS PCI/PnP Confi guration Warning!! Be sure to select the correct settings for your system. Wrong settings may cause the system to malfunction. Onboard LAN1 Device/Onboard LAN2 Device Select Enabled to activate the onboard LAN 1 or LAN 2 device. The options are Enabled and Disabled.

  • Page 58: Advanced Chipset Control

    PDSLM User’s Manual Palette Snooping Select Enabled to inform the PCI devices that an ISA graphics device is installed in the system in order for the graphics card to function properly. The options are Enabled and Disabled. PCI IDE BusMaster Set this value to allow or prevent the use of PCI IDE busmastering.
  • Page 59 Chapter 4: AMI BIOS DVMT/Fixed Memory This option allows the user to set the amount of memory to be used for the operation of DVMT/Fixed Mode. The options are 128 MB, 64 MB and Maximum DVMT. South Bridge Confi guration This feature allows the user to confi...
  • Page 60 PDSLM User’s Manual Execute Disable Bit (Available when supported by the OS and the CPU.) Set to Enabled to enable the Execute Disable Bit to allow the processor to classify areas in the system memory where an application code can execute and where it cannot in order to prevent a worm or a virus from creating a fl...
  • Page 61 Chapter 4: AMI BIOS Serial Port2 Address This option specifi es the base I/O port address and the Interrupt Request address of Serial Port 2. Select Disabled to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port physically becomes unavailable.
  • Page 62 PDSLM User’s Manual VT-UTF8 Comb Key Support Select Enabled to enable the VT-UTF8 combination key support for the ANSI/ VT100 terminals. The options are Enabled and Disabled. Sredir Memory Display Delay This feature allows the user to decide how many seconds the BIOS will wait before memory information is displayed.

  • Page 63: Trusted Computing

    VBAT Note: In the Windows OS environment, the Supero Doctor III settings take prece- dence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the temperature threshold settings previously set in the BIOS. Any subsequent changes to these thresholds must be made within Supero Doctor, since the SD III settings override the BIOS settings.

  • Page 64: Security Settings

    PDSLM User’s Manual Security Settings AMI BIOS provides a Supervisor password and a User password. If you use both passwords, the Supervisor password must be set fi rst. Supervisor Password This feature allows the user to set a Supervisor Password.

  • Page 65: Boot Settings

    Chapter 4: AMI BIOS Boot Settings This feature allows the user to confi gure Boot Settings. Boot Device Priority This feature allows the user to specify the sequence of priority for the Boot De- vice. The default settings are: · 1st boot device – Network: IBA GE Slot ·...

  • Page 66: Exit Options

    PDSLM User’s Manual Exit Options Select the Exit tab from the AMI BIOS Setup Utility screen to enter the Exit BIOS Setup screen. Save Changes and Exit When you have completed the system confi guration, select this option and press <Enter>...

  • Page 67: Appendix A: Bios Error Beep Codes

    Appendix A: AMIBIOS Error Beep Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur. Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process.
  • Page 68 PDSLM User’s Manual Notes...
  • Page 69 Appendix B: BIOS POST Checkpoint Codes Appendix B BIOS POST Checkpoint Codes When AMIBIOS performs the Power On Self Test, it writes checkpoint codes to I/O port 0080h. If the computer cannot complete the boot process, diagnostic equipment can be attached to the computer to read I/O port 0080h. Uncompressed Initialization Codes The uncompressed initialization checkpoint codes are listed in order of execution: Checkpoint...
  • Page 70 PDSLM User's Manual Bootblock Recovery Codes The bootblock recovery checkpoint codes are listed in order of execution: Checkpoint Code Description The onboard fl oppy controller if available is initialized. Next, beginning the base 512 KB memory test. Initializing the interrupt vector table next.
  • Page 71 Appendix B: BIOS POST Checkpoint Codes Uncompressed Initialization Codes The following runtime checkpoint codes are listed in order of execution. These codes are uncompressed in F0000h shadow RAM. Checkpoint Code Description The NMI is disabled. Next, checking for a soft reset or a power on condition. The BIOS stack has been built.
  • Page 72 PDSLM User's Manual Checkpoint Code Description Interrupt vector initialization is done. Clearing the password if the POST DIAG switch is on. Any initialization before setting video mode will be done next. Initialization before setting the video mode is complete. Confi guring the mono- chrome mode and color mode settings next.
  • Page 73 Appendix B: BIOS POST Checkpoint Codes Checkpoint Code Description The memory below 1 MB has been cleared via a soft reset. Clearing the memory above 1 MB next. The memory above 1 MB has been cleared via a soft reset. Saving the memory size next.
  • Page 74 PDSLM User's Manual Checkpoint Code Description The password was checked. Performing any required programming before WIN- BIOS Setup next. The programming before WINBIOS Setup has completed. Uncompressing the WINBIOS Setup code and executing the AMIBIOS Setup or WINBIOS Setup utility next.
  • Page 75 Appendix B: BIOS POST Checkpoint Codes Checkpoint Code Description Returned from adaptor ROM at E000h control. Performing any initialization required after the E000 option ROM had control next. Initialization after E000 option ROM control has completed. Displaying the system confi guration next. Uncompressing the DMI data and executing DMI POST initialization next.
  • Page 76 PDSLM User's Manual Notes...

  • Page 77: Appendix C: Installing Software Programs And Drivers

    Appendix C: Installing Software Programs and Drivers Appendix C Installing Software Programs and Drivers C-1 Installing Software Programs and Drivers After you've installed the Windows Operating System, a screen as shown below will appear. You are ready to install software programs and drivers that have not yet been installed.
  • Page 78 The Supero Doctor III program is a Web-base management tool that supports remote management capability. It includes Remote and Local Management tools. The local management is called the SD III Client. The Supero Doctor III program included on the CDROM that came with your motherboard allows you to monitor the environment and operations of your system.
  • Page 79 Note: SD III Software Revision 1.0 can be downloaded from our Web site at: ftp://ftp. supermicro.com/utility/Supero_Doctor_III/. You can also download the SDIII User's Guide at http://www.supermicro.com/PRODUCT/Manuals/SDIII/UserGuide.pdf. For Linux, we will still recommend that you use the Supero Doctor II Utility.
  • Page 80 PDSLM User's Manual Notes...
  • Page 81 (Disclaimer continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medi- cal equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signifi cant injury or loss of life or catastrophic property damage.

Table of Contents