Table of Contents
Advertisement
ISA IO Cycle Delay
This settings for this option are Full Delay, 1.5 BCLK, 2.5 BLCK and 3.5
BLCK.
MPS 1.4 Support
The settings for this option are Enabled and Disabled.
4-6
PCI PnP Setup
Choose PCI/PnP Setup from the AMIBIOS Setup main menu. All PCI/PnP
options are described in this section. The PCI/PnP Setup screen is shown
below.
Main
Advanced Chipset PCIPnP
Plug & Play O/S
Reset Config Data
PCI Latency Timer
Allocate IRQ to VGA
Palette Snooping
PCI IDE BusMaster
OffBoard PCI/ISA IDE Card
USB Controller
PCI Slot-1 IRQ preference
PCI Slot-2 IRQ preference
Onboard VGA IRQ preference
Onboard LAN1 IRQ preference
Onboard LAN2 IRQ preference
PCI Slot-3 IRQ preference
PCI Slot-4 IRQ preference
Onboard SCSI IRQ preference
V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.
Plug & Play OS
Choose the No setting for computers that do not meet the Plug and Play
specifications, which will allow the BIOS to configure all the devices in the
system. Choosing the Yes setting lets the operating system configure PnP
devices that are not required for boot up (if the system has a PnP operating
system). The operating system would have the ability to change interrupt,
BIOS SETUP UTILITY
Power Boot Security Exit
[No]
[No]
[64]
[Yes]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
4-17
Chapter 7: BIOS/Setup
No: lets the BIOS
configure all the
devices in the system.
Yes: lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
↔
Select Screen
↑↓
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
Advertisement
Table of Contents
