Supero SUPER P3TDLR User Manual page 78

S
UPER P3TDLR User's Manual
1 beep: Refresh failure - the memory refresh circuitry on the motherboard is
faulty. (Fatal error)
3 beeps: Base 64KB memory failure - memory failure occurred in the first
64KB of memory. (Fatal error)
6 beeps: Keyboard controller Gate A20 failure. The keyboard controller may
be bad. The BIOS cannot switch to protected mode. (Fatal error)
7 beeps: Processor exception interrupt error. The CPU generated an
exception interrupt. (Fatal error)
8 beeps: Display memory read/write error. The system video adapter is
either missing or its memory is faulty. This is not a fatal error.
2 beeps: BIOS ROM file absent - the BIOS was unable to find the specific
file name required to flash the BIOS.
4 beeps: Flash program successful.
5 beeps: Media read error. The floppy or ATAPI media is not present or
cannot be read.
7 beeps: Flash not present. The BIOS was unable to detect the presence of
a flash device.
10 beeps: Flash erase error - the flash device could not be properly erased.
11 beeps: Flash program error.
12 beeps: BIOS ROM file incorrect size.
13 beeps: BIOS ROM image mismatch. The BIOS ROM file layout configu-
ration does not match the image present in the flash device.
AMIBIOS Error Beep Codes
POST Error Beep Codes
Bootblock Error Beep Codes
A-2