Table of Contents
Advertisement
S
P3TDLR User's
UPER
2.
Attaching heat sinks to the processors:
Two passive heat sinks (one for each processor) have been included
with your SUPER P3TDLR. Secure a heat sink to each processor with a
suitable thermal compound to best conduct the heat from the processor to
the heat sink. Make sure that you apply the compound evenly and that
good contact is made between the CPU chip (the die) and the heat sink.
Insufficient contact or improper types of heat sinks and thermal com-
pounds can cause the processor to overheat, which may crash the
system.
4.
Removing the processors:
To remove the processors from the motherboard, simply follow the
installation process in reverse order.
Figure 2-3.
FCPGA Socket: Empty and with Processor Installed
Manual
(low
power Pentium
2-6
III
shown)
Advertisement
Table of Contents
