Supero SUPER P3TDLR User Manual page 11

Jumpers Description
JBT1 CMOS Clear (p. 2-18)
JP1 SCSI (p. 2-19)
JP2 Front Side Bus Speed (p. 2-17) Pins 1-2 (Auto)
JP7 Overheat Alarm (p. 2-18)
JP8 LAN1 Enable/Disable (p. 2-18) Open (Enabled)
JP11 Power Supply Fail (p. 2-11)
JP12 Power Supply Fail (p. 2-11)
JP13 Speed for 64-bit PCI (2-17)
JP24 LAN2 Enable/Disable (p. 2-18) Open (Enabled)
JP62 Onboard VGA (p. 2-19)
J210 Watchdog Reset (p. 2-19)
DIP Switches
SW1 (1-4)
Connectors
ATX Power
DIMM0-DIMM3
COM1/2
CPU FAN (2 ea)
Fan Headers (5 ea) Chassis, thermal and blower (p. 2-14)
J23/J24
J26
J28
J105/106
JA1
JF1
JP61
LAN1/2
SLED1
USB 1/2
WOL
WOM
P3TDLR Quick Reference
Description
CPU Core/Bus Ratio
Description
24-pin ATX Power Connector (p. 2-11)
Memory (SDRAM) Slots (p. 2-9)
COM1/COM2 Serial Port Connector (p. 2-14)
CPU1/CPU2 Fan Header (p. 2-14)
IDE Hard Disk Drive 1/2 Connectors (p. 2-20)
Floppy Disk Drive Connector (p. 2-20)
PS/2 Keyboard/Mouse (p. 2-9)
USB3/USB4 (p. 2-15)
Ultra160 LVD SCSI Connector (p. 2-21)
Front Control Panel (p. 2-4)
PWR_LED (p. 2-4)
Ethernet Ports 1/2 (p. 2-15)
SCSI LED header (p. 2-15)
Universal Serial Bus 1/2 Ports (p. 2-15)
Wake-on-LAN Header (p. 2-16)
Wake-on-Modem Header (p. 2-16)
1-5
Chapter 1: Introduction
Default Setting
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Closed (Enabled)
Pin 4 (Reset)
Closed (Enabled)
Closed (33 MHz)
Pins 1-2 (Enabled)
Open (Disabled)
Default Setting
(see p. 2-16)