Ide Configuration - Supero SUPER P3TDLR User Manual

Hide thumbs Also See for SUPER P3TDLR:

Table of Contents

UPER P3TDLR User's Manual

Serial Port 2 IRQ

This option specifies the Interrupt Request address of serial port 2.

settings for this item include Disabled, 4 and 3.

and then press <Enter>.

Parallel Port Address

This option specifies the I/O address used by the parallel port. The settings

for this item include Disabled, 378, 278 and 3BC. Select your setting and

then press "Enter".

Parallel Port IRQ

This option allows the user to set the Parallel Port IRQ. The settings

for this item include 5 and 7.

Parallel Port Mode

This option specifies the parallel port mode. The settings for this item

include Normal, Bi-directional, EPP and ECP.

IDE Configuration

Onboard PCI IDE Controller

This option allows the user to enable or disable the integrated IDE Control-

ler. The settings include Disabled and Both. Select "Disabled" to disable

the Integrated IDE Controller. Select "Both" to enable both Primary and Sec-

ondary IDE Controllers.

ECP Mode DMA Channel

This option allows the user to set the setting for the ECP

Mode of the DMA Channel. The settings for this item include

0, 1 and 3.

Select the desired setting

4-6

The

Table of Contents