S
P3TDLR User's
UPER
CMOS Clear
Refer to Table 2-21 for setting
JBT1 to clear CMOS.
move the AC power cord from the
system before clearing CMOS.
Over Heat Alarm
Jumper JP7 allows you to enable
or disable the over heat alarm.
Refer to Table 2-22 for jumper set-
tings.
LAN 1 Enable/Disable
Use jumper JP8 to enable or disable
the onboard LAN 1 (Ethernet) port.
The default setting is enabled. See
Table 2-23 for jumper settings.
LAN 2 Enable/Disable
Use jumper JP24 to enable or disable
the onboard LAN 2 (Ethernet) port.
The default setting is enabled.
Table 2-24 for jumper settings.
Manual
Always re-
See
2-16
T a b le 2 -2 1
C M O S C le a r J u m p e r S e ttin g s
(J B T 1 )
Jumper
Position
D efinition
1-2
N ormal
2-3
C M O S C lear
T a b le 2 -2 2
O ve r H e a t A larm
J u m p e r S e tting s (J P 7 )
Jumper
Position
D efinition
O pen
D isabled
C losed
Enabled
T a b le 2 -2 3
L A N 1 E n a b le/D is a b le
J u m p e r S e tting s (J P 8 )
Jumper
Position
D efinition
O pen
Enabled
C losed
D isabled
T a b le 2 -2 4
L A N 2 E n a b le/D is a b le
J u m p e r S e tting s (J P 2 4 )
Jumper
Position
D efinition
O pen
Enabled
C losed
D isabled