Security Setup - Supero SUPER P3TDLR User Manual

S
UPER P3TDLR User's Manual
4-9

Security Setup

Choose "Security Setup" from the AMIBIOS Setup main menu. All Security
Setup options are described in this section. The Security Setup screen is
shown below.
Main Advanced
Supervisor Password
User Password
> Change Supervisor Password
> Change User Password
> Clear User Password
Boot Sector Virus Protection
V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.
Supervisor Password
User Password
AMIBIOS provides both Supervisor and User password functions. If you
use both passwords, the Supervisor password must be set first.
The system can be configured so that all users must enter a password
every time the system boots or when AMIBIOS Setup is executed, using
either or both the Supervisor password or User password. The Supervisor
and User passwords activate two different levels of password security. If
you select password support, you are prompted for a 1 – 6 character
password. Type the password on the keyboard. The password does not
appear on the screen when typed. Make sure you write it down. If you
forget it, you must clear CMOS and reconfigure. Remember your Pass-
word! Keep a record of the new password when the password is
changed. If you forget the password, you must erase the system configu-
ration information in CMOS.
BIOS SETUP UTILITY
Chipset PCIPnP Power Boot Security Exit
: Not Installed
: Not Installed
[Disabled]
4-26
Install or Change the
password.
↔
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit