Table of Contents
Advertisement
Check
Point
Description
87
The
been completed. Uncompressing the WINBIOS Setup
code and executing the AMIBIOS Setup or WINBIOS
Setup utility next.
88
Returned from WINBIOS Setup and cleared the screen.
Performing any necessary programming after WINBIOS
Setup next.
89
The programming after WINBIOS Setup has been
completed. Displaying the power-on screen message
next.
8B
The first screen message has been displayed.
<WAIT...> message is displayed.
mouse check and extended BIOS data area allocation
check next.
8C
Programming the WINBIOS Setup options next.
8D
The
Resetting the hard disk controller next.
8F
The hard disk controller has been reset.
floppy drive controller next.
91
The
Configuring the hard disk drive controller next.
95
Initializing the bus option ROMs from C800 next.
96
Initializing before passing control to the adaptor ROM at
C800.
97
Initialization before the C800 adaptor ROM gains
control has been completed.
is next.
98
The adaptor ROM had control and has now returned
control to BIOS POST.
processing after the option ROM returned control.
Appendix B: AMIBIOS POST Diagnostic Error Messages
programming
WINBIOS
Setup
floppy
drive
B-7
before
WINBIOS
Performing the PS/2
options
controller
has
The adaptor ROM check
Performing any required
Setup
has
The
are
programmed.
Configuring the
been
configured.
Advertisement
Table of Contents
