Configuring The Clients; Testing Connections - Motorola WS2000 System Reference Manual

12.15 Configuring the Clients

Clarissa has now finished configuring the switch. Next she configures the wired clients.
Going to each device, she gives it the IP address and other networking information that it will need to
communicate with the switch:
Client
Wired POS terminal #1
Wired POS terminal #2
Server
Then she does the same thing with the wireless clients:
Client type
Wireless POS terminals
Handheld terminals
Wireless printers
The remaining tasks are to test the network and to put the Access Ports in their permanent locations.

12.15.1 Testing Connections

Clarissa powers up several sample devices and tests them, to be sure that they work as configured. She tests
whether the devices can connect to the wireless switch and whether they can connect to devices on other
subnets.
After she is confident that everything is working, she moves the Access Ports to their permanent locations.
She connects the WS2000 to the DSL modem. Finally, she tests the connection from each subnet to the
WAN.
The store network is now complete.
IP Address Subnet Mask
192.168.0.4 255.255.255.0
192.168.0.5 255.255.255.0
192.168.0.6 255.255.255.0
WLAN ESSID Wireless channel
CCC-POS 3
CCC-POS 3
CCC-Printers 7
WS2000 Use Cases
Gateway WS2000 Port
192.168.0.1 4
192.168.0.1 5
192.168.0.1 6
Authentication Encryption
802.1x EAP WPA-TKIP
802.1x EAP WPA-TKIP
None WEP
12-29