Setting Up The Access Control List; Setting The Trap Configuration; Setting The Trap Configuration For Snmp V1/V2C - Motorola WS2000 System Reference Manual

7.11.2 Setting Up the Access Control List

To set up the Access Control list as specified by a
range of IP addresses, click the
Control button at the bottom of the SNMP Access
screen. The SNMP Access Control screen appears:
1. Click the Add
Access Control table.
2. Specify the IP address for the user(s) that have
access. Enter an IP address only in the
Address column to specify an address for a single
SNMP user. Enter both the
and Ending IP Address
range of addresses for SNMP users.
3. Click Ok to save changes and return to the SNMP Access screen.

7.11.3 Setting the Trap Configuration

To set the trap notification destination for SNMP, select
SNMP Trap Configuration

7.11.4 Setting the Trap Configuration for SNMP v1/v2c

To set the trap notification destination for the SNMP v1/v2c servers, add one or more entries to SNMP v1/
v2c Trap Configuration table.
1. Click the Add
2. Specify a Destination IP
generated.
SNMP Access
button to create a new entry in the
Starting IP
Starting IP Address
columns to specify a
from the left menu.
button to add a new entry to the table.
addresses for the systems that will receive notification when an SNMP trap is
[System Configuration] -->
7-19
Switch Administration
SNMP Access -->