Setting Up A Proxy Radius Server - Motorola WS2000 System Reference Manual

Group Member Attribute
The following are the additional settings that are required for the LDAPS data source.
Fully Qualified Domain name
CA Certificate
Client Certificate
2. Click Apply to save your changes.

6.2.3 Setting Up a Proxy RADIUS Server

The WS 2000 Wireless Switch provides the capability to proxy authentication requests to a remote RADIUS
server based upon the suffix of the user ID (such as myisp.com or company.com). Select
Authentication] -->
the definitions of proxies are made.
Up to 10 proxy servers are supported.
1. Enter a value between 3 and 6 in the
attempts to reach a proxy server before giving up.
2. Enter a value between 5 and 10 in the
cause the switch to time out on a request to a proxy server.
3. Use the Add button to add a new entry based upon a domain suffix to the Proxy Server Settings area.
Then fill in the following information for each entry:
Suffix
RADIUS Server IP
Specify the Group Member Attribute to be sent to the LDAP server when
authenticating the users.
Enter the fully qualified domain name of the LDAP server that provides
authentication information to your RADIUS server.
Specify the CA certificate used for authentication.
Specific the client certificate used for authentication.
RADIUS Server --> Proxy
Retry Count
Timeout
Enter the domain suffix (such as myisp.com or mycompany.com) of the users to be sent to
the specified proxy server.
Enter the IP address of the RADIUS server that will be acting as a proxy server.
to go to the RADIUS Proxy Configuration screen is where
field to indicate the number of times the switch
field to indicate the number of elapsed seconds that will
Administrator and User Access
[User
6-9