Motorola WS2000 System Reference Manual page 135

Access
Port
80
Applet HTTP
443
Applet HTTPS
23
CLI TELNET
22
CLI SSH
161
SNMP
21
CF Card
Access: FTP/
AirBeam
NOTE: If all the check boxes in this section are disabled, the administrator will not be able to access the
switch through the WS2000 Management System user interface. The only way the device can then be
accessed is through a direct serial connection from a PC. If this situation occurs accidentally, you can
restore the settings using the command line.
Any-nw
Use the Any-nw column to allow access to the WS2000 from all the subnets for the selected protocol. To
select individual subnets, deselect this option. This enables the Subnets 1-6 columns from where you can
select the appropriate subnet. When selected, the WS2000 can also be accessed by devices from any
network connected to any subnet.
Subnets 1-6 Columns
Use the Subnets 1 - 6 columns to allow access to the WS2000 Wireless Switch from the available subnets.
When not selected, administrative access to the WS2000 is not available for that protocol from that subnet.
WAN Column
Use the From WAN column to allow access to the WS2000 Wireless Switch from WAN. When not selected,
administrative access to the WS2000 is not available for that protocol from WAN.
LOG Column
To enable logging for connections through a particular protocol, click the check box for the protocol under the
LOG column. When logging is enabled, the first successful connection using the protocol is logged. However,
every failed connection through any access protocol is also logged.
Allow Administrative access to
To allow administrators to access the switch from specific IPs, click the
Administrative access to
administrator can access this switch. However, this access is only allowed for a maximum of 20 devices.
To allow administrative access to a range of IPs, provide the netmask for the address range.
Description
Allows administrator access to the WS2000 Management System through a standard
HTTP web browser.
Allows administrator access to the WS2000 Management System through a HTTPS
(secure) connection from a web browser.
Allows administrator access to the wireless switch through TELNET. Allows the
administrator to access the switch through the command line interface.
Allows administrator access to the command line interface of the wireless switch
through the Secure Shell (SSH) protocol of TCP/IP.
Allows administrator access to change switch settings from an SNMP server.
Allows administrator access with AirBEAM using FTP to upload and download
configuration data, firmware, and other software to/from the switch's CF card. The
username and password used for AirBEAM is configured in the AirBEAM Access
section of the screen.
list. A line is created in the list where you can add the IP address from where an
Administrator and User Access
Add button under the Allow
6-3