Motorola WS2000 System Reference Manual page 90

5-6 WS2000 Wireless Switch System Reference Guide
2. Specify the following fields:
Field
Start MAC
End MAC
WLAN
columns
NOTE: The default setting for the switch has both the Start MAC and End MAC addresses set to "ANY",
and all enabled WLANs checked. This setting allows all the WLANs to adopt any Access Port that it
detects, automatically.
3. Up to 20 entries can be added to the Access Port Adoption list. Click the
Description
This field contains the lowest value in a range of MAC addresses that will use this particular
adoption criteria. To specify a single MAC address instead of a range, enter it in this field as well
as the End MAC field.
This field contains that highest number in a range of MAC addresses that will use this particular
adoption criteria. If this value is empty, the Access Port adopted by this criteria must match the
Start MAC field exactly.
The next eight columns are associate with the eight WLANs that are shown in the upper portion of
the screen. To the left, specify a range of Access Port MAC address for adoption. Then, click the
check boxes of the WLANs that need to adopt the Access Ports in the specified range.
Apply button to save changes.