Mapping Wlans To Vlans - Motorola WS2000 System Reference Manual

10-4 WS2000 Wireless Switch System Reference Guide
6. To enable filtering using IP, check the
when Trunk Port
appears. Set the appropriate filter and click
7. Click Ok on the VLAN Configuration screen to save changes.

10.2.1 Mapping WLANs to VLANs

Use the following steps to map a VLAN, that is not already a part of any subnet, to a WLAN:
1. Select the desired WLAN from the menu.
2. From the Subnet pulldown menu select none. The WLAN is now not associated with any subnet and the
VLAN field can now be edited.
3. Enter a VLAN ID in the
4. Click the Apply
Enable IP Filtering
is set to Wan. To add an IP filter, click
VLAN field to map that VLAN ID to the current WLAN.
button to save the changes.
check box. This option is only available only
IP Filtering button. The IP Filtering dialog
Ok to close the dialog.