Motorola WS2000 System Reference Manual page 181

7-29
Switch Administration
set ssh lan any-nw enable
set ssh lan 1 enable
set ssh lan 2 enable
set ssh lan 3 enable
set ssh lan 4 enable
set ssh lan 5 enable
set ssh lan 6 enable
set ssh wan enable
set timeout 0
set airbeam logging disable
set ftp wan logging disable
set ssh lan logging disable
set ssh wan logging disable
set applet lan logging disable
set applet wan logging disable
set applet slan logging disable
set applet swan logging disable
set cli lan logging disable
set cli wan logging disable
set snmp lan logging disable
set snmp wan logging disable
set limited-access disable
set dns-ip 192.168.0.1
set domain-name ws2ksymbol.com
set dns-relay-mode enable
set support-sshv1 enable
set sslv2 enable
set weak-ssl-cipher enable
/
system
config
// Config menu
set server 192.168.0.10
set user \0
set file cfg.txt
set cfgpath \0
set fw file mf.bin
set fw path \0
set import-enc-password disable
set fw boot on-board-flash
set fw active-partition primary
set bind-interface none
set sensor-fw file leo_sensor.bin
set sensor-fw path \0
set sensor-fw max-size 512000
set ap300-fw file wiap.bin
set ap300-fw path \0
set ap300-fw max-size 512000
set ap300-fw legacy-mode disable