Getting Statistics For A Particular Wlan - Motorola WS2000 System Reference Manual

11-10 WS2000 Wireless Switch System Reference Guide
In the lower section of the screen, the
traffic.
Total pkts per
second
Total bits per second
Total associated
MUs
To clear the RF statistics, click the

11.3.2 Getting Statistics for a Particular WLAN

To see a summary information about wireless operations, select
--> <WLAN name>
appear.
There are four areas on the screen. The Information area shows general information about the Access Port.
The Received and Transmitted areas of the screen display statistics for the cumulative packets, bytes, and
errors received and transmitted through the Access Port. The Associated Mobile Units section lists the MUs
and provides information on specific MUs that are currently transmitting through the Access Port.
Total Switch RF Traffic
Displays the average number of RF packets sent per second across all active
WLANs on the wireless switch. The number in black represents this statistic for
the last 30 seconds and the number in blue represents this statistic for the last
hour.
Displays the average bits sent per second across all active WLANs on the wire-
less switch. The number in black displays this statistic for the last 30 seconds
and the number in blue displays this statistic for the last hour.
Displays current total number of Mobile Units associated with all the active
WLANs on the wireless switch.
Clear all RF Stats
Stats from the navigation menu. A screen like the one shown for EngWLAN (below) will
table gives summary information about RF
button.
[Status & Statistics] --> Wireless Stats