Configuring The Printer Subnet - Motorola WS2000 System Reference Manual

12-9
WS2000 Use Cases
The Default Gateway is already set to the subnet address. This is the IP address to which the DHCP clients
on this subnet will forward their outbound traffic. Clarissa fills in the DNS Server addresses, which
corporate has specified. This will also be supplied to the DHCP clients. The DHCP Lease Time is the time
an IP address will remain assigned to a client after there is no more activity. She leave it at the default and
clicks Ok to save her changes.
Then, in the subnet screen, she clicks Apply to save her overall changes.
Now she will configure the printer subnet.

12.5 Configuring the Printer Subnet

Clarissa selects the second subnet from the list of LAN menu items in the left menu.
She renames this subnet "Printsn", then gives it an IP address of 192.168.1.1 and a subnet mask of
255.255.255.0. The only devices on this subnet are the wireless printers. Using the Interfaces section of the
screen, she associates the second WLAN with this subnet. She activates the DHCP server with an IP address
range of 192.168.1.11 to 192.168.1.254.