Configuring Administrator Access; Selecting The Type Of Admin Access - Motorola WS2000 System Reference Manual

6-2 WS2000 Wireless Switch System Reference Guide

6.1 Configuring Administrator Access

The WS2000 Network Management System allows users to log in to perform administration tasks. The
switch administrator can change any settings within the WS2000 Network Management System. The
default login name for the switch administrator is "admin" and the initial password is "symbol".
The WS2000 Access screen is used to configure the access to the WS 2000 Wireless Switch. This screen is
used to configure the access and related parameters for the WS 2000 Wireless Switch. You can also change
the administrative password from this screen. This screen can be accessed from
--> System Settings --> WS2000 Access

6.1.1 Selecting the Type of Admin Access

The WS2000 Network Management System runs from a standard Web browser. By default, any individual
on an enabled subnet or over the WAN can access the log screen by specifying one of the IP addresses
associated with the user interface. The WS2000 Access screen allows the administrator to restrict access
to the WS2000 switch from different locations. By selecting the appropriate check boxes, you, the
administrator can allow or disallow specific types of access from the WAN port or from the LAN subnets.
NOTE: When connected to the switch using multiple methods, for example, when connected through both
SSH and HTTP, saving the configuration using one of the methods will cause a disconnect from the other
method.
Choose the types of access to allow by checking the associated check box. You can allow or restrict access
to each access type by subnet. Use the checkboxes under each subnet to control access for each access type.
Use the checkboxes under the
WS2000 from any subnet, select the
menu item on the left.
From WAN column to control access from WAN. To allow access to the
Any-nw for the appropriate protocol.
[System Configuration]