Preference Setup; Adjusting Ringer Volume And Ringtone; Change Volume; Change Ringtone - Cisco 8851 User Manual

CLOUD VOICE S Service – Cisco Unified IP Phone 8851
3

Preference Setup

3.1

Adjusting Ringer Volume and Ringtone

1. Press the Volume button
1. Press the Applications button
2. Select Setting. (Use the Navigation and Select button to scroll and
3. Select Ringtone and different types of ringing tone are displayed.
4. Press the Play softkey to play a sample.
5. Press the Set softkey to select the ringtone.
6. Press the Apply softkey to confirm your selection, or press the Back
3.2

Adjusting Brightness

1. Press the Applications button
2. Select Setting. (Use the Navigation and Select button to scroll and
3. Select Brightness.
4. Press the Save softkey to confirm the contrast level, or just press the
Version 4.0
3.1.1

Change Volume

loudness of the ringtone.
3.1.2

Change Ringtone

select.)
softkey to go back to the Ringtone selection screen.
select.)

To increase brightness, press the up on the Navigation and Select
button

To decrease brightness, press the down on Navigation and Select
button
Cancel softkey to exit without changing the setting.
right or left to adjust the
.
.
6
© 2018 WTT HK Limited, All Rights Reserved © WTT HK Limited 2017