Preference Setup; Adjusting Brightness; Adjusting Ringer Volume And Ringtone; Change Volume - Cisco 8845 User Manual

Cloud Voice S Service – Cisco 8845 IP Phone User Guide
2

Preference Setup

2.1

Adjusting Brightness

As the IP Phone display may be affected by the lighting of the office, you can
adjust the brightness accordingly.
1. Press the Applications button
2. Select Setting. (Use the Navigation and Select button to scroll and
3. Select Brightness.
4. Press the Save softkey to confirm the contrast level, or just press the
2.2

Adjusting Ringer Volume and Ringtone

You can change the volume or ringing tone to suit your business environment
by the following procedures:
2.2.1
1. Press the Volume button
2.2.2
1. Press the Applications button
2. Select Setting. (Use the Navigation and Select button to scroll and
3. Select Ringtone and different types of ringing tone are displayed.
4. Press the Play softkey to play a sample.
5. Press the Set softkey to select the ringtone.
6. Press the Apply softkey to confirm your selection, or press the Back to
Version 2.0
select.)

To increase brightness, press the up on the Navigation and Select
button

To decrease brightness, press the down on Navigation and Select
button
Cancel softkey to exit without changing the setting.

Change Volume

loudness of the ringtone.

Change Ringtone

select.)
go back to the Ringtone selection screen.
.
right or left to adjust the
.
6 © WTT HK Limited 2017