Table of Contents
Advertisement
WARNING: To prevent electrical shock, please turn off and unplug the
treadmill before cleaning or performing routine maintenance.
Remove everything on the table before adjusting the table to different angle.
Ensure the knob is secured before placing anything on the table.
CLEANING
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents. Be careful not get excessive moisture on the display
panel as this might cause an electrical hazard or electronics to fail.
Please keep the treadmill, especially, the console, out of direct sunlight to
prevent screen damage.
TROUBLESHOOTING GUIDE
Problem
Treadmill will not
start.
Belt slips.
Belt hesitates
When stepped
on.
Belt is off centered.
MAINTENCE & TROUBLE SHOOTING
Potential Causes
1.
Not plugged in.
2.
Safety tether key not
connected.
3.
House circuit breaker
tripped.
4.
Treadmill circuit breaker
tripped.
Belt not tight enough.
1.
Not enough lubrication
applied onto the running
deck.
2.
Belt is too tight.
Walking belt tension is not
even across the rear roller.
1.
Put the power plug into the
electrical wall outlet.
2.
Install the safety tether key.
3.
Reset or have an electrician
replace the breaker in home.
4.
Wait five minutes and then
press the switch back on.
Adjust belt tension.
1.
Apply silicone lubricant.
2.
Adjust the belt tension.
Center the belt.
25
Corrections
Hide quick links:
Advertisement
Table of Contents
