STORAGE
SETTING DOWN THE TREADMILL
Remove the Knob from the back of the Table. Lift both Table and Table
Angle Adjustment Tube up. Then slot the Table Angle Adjustment Tube into
the Table Angle Adjuster which is under the Table. Screw the removed
Knob into the holes on the Table Angle Adjustment Tube and Table to lock
the Table in place.
To set down the treadmill, place one hand on the back end of the treadmill and
the other hand to pull the Spring Knob, then carefully lower the deck to the
ground until the Spring Knob "pops" down into the locked position.
(See diagrams D, E, and F.)
Note: Do not stand under the deck when setting down the treadmill.
TO PREVENT INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD
WHEN LIFTING UP OR SETTING DOWN THE DECK.
D
E
F
Spring Knob
24