Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Exerpeutic Magnetic Treadmill 4010.6-120116
Summary of Contents for Exerpeutic Magnetic Treadmill 4010.6-120116
- Page 1 Magnetic Treadmill OWNER’S MANUAL 4010.6-120116...
- Page 2 PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. If you need help with product information, assembly, or replacement parts. Please contact customer service. Email us at: Service@paradigmhw.com Or call us at: 1-844-641-7920 Hours: 8:00 am to 5:00 pm (PST) Daily...
-
Page 3: Table Of Contents
TABLE OF CONTENTS SERVICE ------------------------------------------------------------------------- 2 LABEL PLACEMENT -------------------------------------------------------- 3 PRODUCT SAFETY ----------------------------------------------------------- 4 OVERVIEW DRAWING ------------------------------------------------------ 5 PARTS LIST --------------------------------------------------------------------- 6 PARTS LIST & TOOL---------------------------------------------------------- 7 ASSEMBLY ---------------------------------------------------------------------- 8 COMPUTER --------------------------------------------------------------------- 11 STORAGE ----------------------------------------------------------------------- 12 ADJUSTMENTS ---------------------------------------------------------------- 13 LUBRICATION ------------------------------------------------------------------ 15 TROUBLE SHOOTING &... -
Page 4: Service
SERVICE IMPORTANT: FOR NORTH AMERICA ONLY For damage or defective product, questions, replacement parts or any other service support, please contact our customer service department (8:00 AM - 5:00 PM Pacific Standard Time, Daily) by below methods: For Best Service Email: Service@paradigmhw.com Website: www.paradigmhw.com... -
Page 5: Label Placement
LABEL PLACEMENT... -
Page 6: Product Safety
PRODUCT SAFETY Basic precautions should always be followed, including the following safety instructions when using this magnetic treadmill: Read all instructions before using this magnetic treadmill. 1. Check every part of the equipment before exercise. If there is any defective component, replace it immediately; keep the equipment out of use until repair. -
Page 7: Overview Drawing
OVERVIEW DRAWING... -
Page 8: Parts List
PARTS LIST Description Qty No. Description 001 Main Frame 1 034 Handlebar End Cap 002 Incline Adjuster 1 035 Bolt M8x50 003L Left Stabilizer Tube 1 036 Nylon Washer Ø20xØ9.5x2.5 003R Right Stabilizer Tube 1 037 Washer Ø16xØ8.5x1.5 004 Stabilizer 1 038 Washer Ø20xØ10.5x1.5 005 Handlebar 1 039 Bolt M10x60... -
Page 9: Parts List & Tool
PARTS LIST & TOOL Description Qty No. Description 066L Left Protective Cover 1 074 Big Washer Ø20xØ6x1.5 Socket Button Head Cap Screw 066R Right Protective Cover 1 075 M6x55 067 Transport Wheel 2 076 Spring Ø8xØ50x1 068 Small Magnet 1 077 Sensor with Wire 070 Screw ST4.2x20 2 078 Screw ST4.8x10 071 Rubber Pad Ø33x18... -
Page 10: Assembly
ASSEMBLY Tool: 5mm Allen Wrench with Phillips Screwdriver Step 1 Place the magnetic treadmill in the upright position. Remove six Washers (37) and six Bolts (40) from the Left/Right Stabilizer Tubes (3L, 3R with the 5mm Allen Wrench with Phillips Screwdriver provided. - Page 11 ASSEMBLY Step 2 Remove the Round Knob (24) from the Stabilizer (4). Place one hand on the rear end of Main Frame (1) and use the other hand to pull out the Ball Knob (25). Lower the Main Frame (1) down onto the floor. TO PREVENT INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN SETTING DOWN THE DECK.
- Page 12 ASSEMBLY Step 3 Install Round Knob (24) to the bigger hole on the Stabilizer (4) and Main Frame (1) by turning it in a clockwise direction to lock the Main Frame (1) in place. Note: Securely tighten Round Knob (24) so that the treadmill is sturdy.
-
Page 13: Computer
COMPUTER Specifications: TIME ----------------00:00-99:59 MIN: SEC DISTANCE -------- 0.00-9999 MI CALORIES --------0.0-9999 CAL ODOMETER ----- 0-9999 MI PULSE ------------- 40-240 BEATS/MIN Button functions: MODE: Display function selection. SET: To set goal values as exercise target. RESET: To clear goal values. Display functions: SCAN Automatically scans through each display mode at 6-second... -
Page 14: Storage
STORAGE Round Knob (24) shall be positioned here when Main Frame (1) is lifted up in the upright position. Remove Round Knob (24) from the Stabilizer (4) and Main Frame (1). Hold the rear end of the Main Frame (1) by one hand and use the other hand to pull out the Ball Knob (25). -
Page 15: Adjustments
ADJUSTMENTS Adjusting the Tension Control Knob To increase the load, turn the tension control knob in a clockwise direction. To decrease the load, turn the tension Tension Control Knob control knob in a counterclockwise direction. Adjusting the Incline There are 3 incline angles (A: 8%, B: 10%, C: 12%) that the incline adjuster can be set to. - Page 16 ADJUSTMENTS Adjusting the Running Belt The running belt is initially set and adjusted at the factory. However it may come loose during transportation and/or during use. After prolonged use, the belt will begin to stretch out. If the running belt begins to shift to either left or right side, the user can stand on the Anti-slip Pads and hold the handlebar with both hands.
-
Page 17: Lubrication
The treadmill has already been spread with "Silicone Oil" in advance before leaving the manufacturing plant. Silicone oil is without volatility and has gradually permeated through the running belt. There will be no need to re-spread the oil in normal circumstances. "Silicone Oil" may be re-spread once the resistance has been increased and the running belt starts rubbing against the running deck. -
Page 18: Trouble Shooting & Maintenance
TROUBLE SHOOTING & MAINTENANCE TROUBLE SHOOTING PROBLEM: Treadmill running belt slips or is not centered on rear roller. SOLUTION: Refer to the “Adjustments” section on page 15. PROBLEM: Computer not working correctly SOLUTION: Check to make sure the computer wires are connected securely. SOLUTION: Check the batteries are correctly positioned and battery springs are proper contact with batteries. -
Page 19: Warranty
WARRANTY MANUFACTURER’S LIMITED WARRANTY Paradigm Health & Wellness warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with Paradigm’s Owner’s Manual. -
Page 20: Parts Request Form
PARTS REQUEST FORM Paradigm Health & Wellness, Inc. EMAIL THIS FORM WITH YOUR RECIEPT OF PURCHASE TO Service@paradigmhw.com NAME: _______________________________________________________ ADDRESS: ____________________________________________________ CITY ______________ STATE ______________ ZIP ___________________ TELEPHONE: (Day) ____________________________________________ (Night) ____________________________________________ SERIAL#: _____________________________________________________ MODEL#: _____________________________________________________ PURCHASE DATE: _____________________________________________ PLACE OF PURCHASE: _________________________________________ PART # DESCRIPTION...
Need help?
Do you have a question about the Magnetic Treadmill 4010.6-120116 and is the answer not in the manual?
Questions and answers