Table of Contents
Advertisement
ASSEMBLY
Step 4
Install both Right/Left Table Hinges (79R/79L) to the right and left sides of the
Handlebar Support Tube Frame (75) by sliding both Right/Left Table Hinges
(79R/79L) onto the right and left tubes on the sides of the Handlebar Support
Tube Frame (75). Then attach the Table (64) onto both Right/Left Table Hinges
(79R/79L) with four M6x16mm Hexagon Socket Head Cap Bolts (86). Tighten
bolts with the 5M Allen Wrench with Phillips Screwdriver provided.
Lift the Table Angle Adjustment Tube (68) up onto the Table Angle Adjuster
(70) which is under the Table (64). The angle of the Table (64) can be
adjusted. There are 4 levels of incline for the Table (64). Secure the Table
(64) in place by tightening the M6x34 Knob (74).Place the Safety Tether Key
(71) onto the Computer (72).
64
79L
86
74
Left Table Hinge
71
72
86
79R
75
Right Table Hinge
Tool:
Hardware:
(86) Hexagon Socket Head
Allen Wrench with
Cap Bolt (M6x16mm)
Phillips Screwdriver 5M
4 PCS
15
Hide quick links:
Advertisement
Table of Contents
