Information About Selected Parameters; Terminal Status Page; Figure 16: Transmission Information Page - Hughes HN9000 User Manual

System Control Center
The operational parameters listed on the Transmission Information page are shown in a tabular format. The first (left)
column identifies the parameter categories:
• Satellite Interface Statistics – Contains information on transmit status and signal strength, as well as
transmission-related error messages.
• Traffic Statistics: Transmit – Contains statistical information on the specific data transmitted to the satellite from
this satellite modem.

Information about selected parameters

This section provides information for selected parameters on the Transmission Information page. Parameters that may
be most useful for you to know about are listed.
Total Satellite Packets Transmitted – An increasing count of Total Satellite Packets Transmitted indicates that your
satellite modem is successfully transmitting data.

Terminal Status page

The Terminal Status page displays information about the operational state of the satellite modem and operational statistics
such as messages and packets sent, received, and dropped. It indicates whether acceleration is enabled and provides a
count of traffic that moves across the LAN to the satellite modem.
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. A

Figure 16: Transmission Information page

Chapter 2
17